Results 31 to 40 of about 1,780 (139)
A comparative investigation of two epoxy additives derived from cardanol (NC513 and NC514s) for production of films based on poly (lactic acid) (PLA), acetyl tributyl citrate (ATBC), and poly (butylene adipate‐co‐terephthalate) (PBAT) clarified their distinct roles, with NC513 mainly acting as a plasticizer, reducing viscosity and enhancing ductility ...
Norma Mallegni +3 more
wiley +1 more source
Research on the Volumetric Efficiency of 2D Piston Pumps with a Balanced Force
Axial piston pumps with high rotational speeds are required in many fields to increase the power-to-weight ratio. However, three main sliding friction pairs in the pump restrict the increase in rotational speed.
Yu Huang +4 more
doaj +1 more source
An experimental device for physical simulation of hydraulic fracturing, comprising: a load‐bearing mechanism with multiple interconnected plates that collectively form an sample chamber; a load‐generating mechanisms, with multiple load‐generating mechanisms arranged within the experimental chamber.
Delei Shang +5 more
wiley +1 more source
Abstract Objective Memory problems are comorbid with temporal lobe epilepsy (TLE). Animal models of TLE reveal impairments in spatial firing fields of hippocampal place cells, providing a potential neural substrate for memory problems. Each subfield of the hippocampus carries out unique aspects of spatial memory, yet little is known about how ...
Brittney L. Boublil +4 more
wiley +1 more source
A novel composite groove array surface was fabricated using femtosecond laser ablation technology to enhance self-replenishment capability. Initially, the driving efficiency of droplets on the composite groove array surface was tested using a high-speed ...
Tianrui Zhang +4 more
doaj +1 more source
An evaluation method of volume fracturing effects for vertical wells in low permeability reservoirs
To evaluate the fracturing effect and dynamic change process after volume fracturing with vertical wells in low permeability oil reservoirs, an oil-water two-phase flow model and a well model are built.
Anshun ZHANG +8 more
doaj +1 more source
Thermoplastic‐Resin Transfer Molding Technology: Development and Challenges Toward Industrialization
Illustration of the key aspects involved in the manufacture of thermoplastic composites by T‐RTM highlighting the relationships between raw materials, resin mixing strategies, polymerization parameters, and processing equipment ranging from laboratory to industrial scale. ABSTRACT Driven by increasingly stringent international environmental regulations,
Filipe P. Martins +4 more
wiley +1 more source
Reuse treatment technology of fracturing backflow fluid and its application in Wuqi Oilfield
The fracturing backflow fluid in Wuqi(WQ) Oilfield has problems such as large quantity, high viscosity, and difficult treatment, and the environmental situation is extremely severe.
CHEN Gang +6 more
doaj +1 more source
Research on the Volumetric Efficiency of a Novel Stacked Roller 2D Piston Pump
In order to improve the volumetric efficiency of the axial piston pump, this paper proposes a novel stacked roller 2D piston pump. It utilizes the alternate communication between the distribution cylinder and the oil intake and discharge ports of the ...
Chenchen Zhang +5 more
doaj +1 more source
Exploiting Device Deformability for Fluid and Particle Manipulation
Deformable devices enable fluid and particle manipulation modes that are inaccessible to rigid platforms. This review examines soft materials and architectures that translate controlled deformation into microscale fluid operations such as pumping, valving, mixing, and particle handling.
Zhiyang Hong +4 more
wiley +1 more source

