Results 241 to 250 of about 6,357,860 (386)
Additive manufacturing of magnesium alloys by laser is difficult because the melting point of the oxide layer is much higher than the evaporation temperature of the metal underneath. Making the oxide layer thinner can solve this problem. Alloying magnesium with strontium makes the oxide layer thinner, especially at 0.5 wt%.
Elmar Jonas Breitbach+8 more
wiley +1 more source
Influence law of air flows on the risk of secondary oxidation spontaneous combustion of coal. [PDF]
Chai Z, Jia B, Yu R, Zhao W.
europepmc +1 more source
A NOTE-ON THE SOLUBILITY OF HYDRATED COPPER OXIDE IN NITRIC ACID [PDF]
S. C. SIRCAR, B. PRASAD
openalex +1 more source
Incorporating nanosized silver into titanium for antimicrobial materials exploits the metastable miscibility gap between silver and titanium. Silver nanoparticles are synthesized via pulsed laser ablation in liquid. Silver addition refines the microstructure, increases hardness by 30%, and reduces Staphylococcus capitis microbial adhesion by 70%, with ...
Hamed Shokri+4 more
wiley +1 more source
Surface Oxidation of Transition Metal Nitrides. [PDF]
Liu J+6 more
europepmc +1 more source
VII.—The oxidation of organic acids in presence of ferrous iron. Part I [PDF]
H. J. H. Fenton, H. O. Jones
openalex +1 more source
Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles
This work presents the manufacturing of copper‐plated ceramic nanoparticles in an environmentally friendly way. Supported by organic functionalizations with pectin an electroless plating step can be performed. Sustainable reagents like xylose, and several amino acids are used for the reduction process.
Lukas Mielewczyk+8 more
wiley +1 more source
Effects of Nitrate on Hydrogenogenic Carbon Monoxide Oxidation in Parageobacillus thermoglucosidasius. [PDF]
Katayama YA+6 more
europepmc +1 more source
In this study, how friction‐welding parameters (rotational speed, etc.) affect the morphology, distribution, and local thickness of the intermetallic compound layer (IMC‐layer) in friction‐welded steel‐aluminum hybrid components is investigated. In the results, it is shown that lower speeds (700 rpm) lead to a more uniform, thinner IMC‐layer (<0.5 μm),
Christoph Kahra+6 more
wiley +1 more source