Results 31 to 40 of about 161,473 (191)
Denoising Analysis of Partial Discharge Acoustic Signal Based on SVMD-PCA
Partial discharge (PD) acoustic signal detection is one of the effective means to assess the insulation status of power transformers. In actual monitoring, white noise is likely to cause strong interference to the partial discharge acoustic signal of the
Panpan Cao +3 more
doaj +1 more source
Partial discharge pulse propagation in power cable and partial discharge monitoring system [PDF]
Partial discharge (PD) based condition monitoring has been widely applied to power cables. However, difficulties in interpretation of measurement results (location and criticality) remain to be tackled. This paper aims to develop further knowledge in PD signal propagation in power cables and attenuation by the PD monitoring system devices to address ...
Sheng, Bojie +6 more
openaire +3 more sources
Partial Discharge Inception and Breakdown Voltage Analysis in PCB-Based Electrode Structures
This paper investigates partial discharge (PD) characteristics and breakdown behavior in five electrode configurations fabricated from fiberglass circuit boards, including parallel electrode (PE), triangular electrode (TE), right-angled electrode (RE ...
Tzu-Ching Tai +4 more
doaj +1 more source
Blind equalization of partial discharge channels [PDF]
In the case of partial discharge signals, obtained during "online" monitoring or "off-line" tests of the generator, there is often interference between the direct and reflected signals or disturbances during propagation through the medium, i.e.
Žigić Aleksandar +3 more
doaj +1 more source
Device for online monitoring of insulation faults in high-voltage switchgears
Partial discharges are the major cause of deterioration in the insulation characteristics of switchgears. Therefore, timely detection of partial discharge in switchgear and potential insulation faults is an urgent problem that needs to be addressed in ...
Jiajia Song, Jinbo Zhang, Xinnan Fan
doaj +1 more source
The insulation state of the mine cable plays an important role in the stable operation of the mine power supply system. Partial discharge on-line monitoring is an important means of cable insulation state monitoring.
Jiyuan CAO +6 more
doaj +1 more source
Partial discharge detection and identification based on chipless RFID system [PDF]
Zhenning Yang
openalex +1 more source
Partial discharge characteristics of IGBT module in mine frequency converter under step pulse
The partial discharge occurs in IGBT device module of mine equipment.which leads to the breakdown of insulation and burns the device.In this paper the causes and characteristics of pd in IGBT module were studied.Therefore, based on the research of ...
Wang Yanwen +5 more
doaj +1 more source
High‐frequency sinusoidal voltage excitation is proposed as a feasible method to solve the difficulty of partial discharge detection at the epoxy interface. In order to study the development process of partial discharge under high‐frequency stress, a two‐
Jian Wang +5 more
doaj +1 more source
FEA-Based Simulation of Accelerated Ageing in a Power Cable Due to Sustained Partial Discharge Activities in a Spherical Cavity [PDF]
Umar Musa +7 more
openalex +1 more source

