Results 1 to 10 of about 13,113 (170)
ANAEROBICALLY DIGESTED BOVINE BIOFIBER AS A SOURCE OF FIBER FOR PARTICLEBOARD MANUFACTURING: AN ECONOMIC ANALYSIS [PDF]
This paper explores the physical and economic potential to substitute anaerobically digested bovine biofiber (ADBF) for wood in the making of particleboard.
Henry Spelter +2 more
doaj +1 more source
Potensi Serbuk Kayu Ulin dan Serbuk Bambu Sebagai Aplikasi Papan Partikel Ramah Lingkungan - Review
The wood and bamboo waste from the exploitation and industry are still not fully utilized where they are now being used as raw material for particleboard.
Andromeda Dwi Laksono +3 more
doaj +1 more source
Particleboard is a panel product made of wood particles or other lignocellulosic materials added with adhesive then pressed. The development of particleboard manufactured using non wood biomass has become important due to the decreased of wood as main ...
Kurnia Wiji Prasetiyo +6 more
doaj +1 more source
Mechanical Properties of Structural Particleboard and Termite and Decay Resistance
The mechanical properties and termite and decay resistance performance of wood-based panel used in wooden houses were evaluated. The physical and mechanical properties, along with the resistance levels, of commonly used wood-based panels, including ...
Min Lee +3 more
doaj +2 more sources
The application of citric acid and glycerol as natural binder was investigated for the manufacturing of jute stick particleboard in this study. The effects of citric acid content (0–30 wt%), citric acid and glycerol mixture (ratio of CA–G), and pressing ...
Ireen Parvin Nitu +4 more
doaj +1 more source
Flaw Detection on a Tilted Particleboard by Use of the Spec-Radiation Method
Herein, we present a novel approach to the spec-radiation method (a method of acoustical holography) for determining the sound distribution on a tilted particleboard by calculating a single plane and rotation in the frequency domain.
Andreas Sebastian Schmelt, Jens Twiefel
doaj +1 more source
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [PDF]
Beneficial utilization of large quantity of paper sludge from Mazandaran Wood & Paper Industry in particleboard manufacturing has been studied. Single-layer and three-layer particleboard (paper sludge as a surface layer) were produced.
asghar tarmian +3 more
doaj +1 more source
Modification in the manufacturing process of bio-adhesive need to be carried out to improve the properties of sorghum bagasse particleboard, such as adding nanocatalyst into the bio-based adhesive.
Yunia Frida Adelka +9 more
doaj +1 more source
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [PDF]
The acrylated epoxidized soy oil (AESO) was synthesized from epoxidized soy oil and its properties were investigated. Wheat straw particle boards were produced by the synthesized resin with 8% and 13% contents based on straws weight at three pressing ...
A. Shakeri, T. Tabrsa, M. Tasoji
doaj +1 more source
The objectives of the study was to determine the effect of phoxim on the properties of rubber wood particleboard (Hevea brasiliensis ) phoxim concentration used were 0.05,1, 1.5 and 2 % based on particle dry weight.
Rodjak Memed +2 more
doaj +1 more source

