Results 1 to 10 of about 1,656 (147)
The physical properties of lead lanthanum zirconate titanate (PLZT) ceramics have been investigated as a function of a PbO excess from 0 to 20 mol% in samples of Pb0.94La0.06(Zr0.6895Ti0.2955)O3 (composition that reveals the best performance for ...
Atair Carvalho da Silva +3 more
doaj +9 more sources
The influence of PbO excess in the charge on the optical transmission of Pb2MoO5 crystals
The single crystals of acousto-optic Pb2MoO5 were grown by the Czochralski technique from a charge of stoichiometric composition and with an excess of lead oxide. Optical transmission spectra of these crystals were measured in the visible wavelength range. The effect of the heat treatment in air and in vacuum was considered.
I. P. Volnianska +3 more
openaire +1 more source
Inkjet-printing-derived lead-zirconate-titanate-based thick films for printed electronics
We have investigated the processing of lead-zirconate-titanate-based thick films by inkjet printing Pb(Zr0.53Ti0.47)0.98Nb0.02O3 with a 6 mol% excess of PbO nanosized powder dispersed in water.
Danjela Kuscer +2 more
doaj +1 more source
This work is devoted to the crystallization and investigation of the optical properties of single crystalline films (SCFs) of Ce3+-doped Y3−xCaxAl5−ySiyO12 garnet, where the content of Ca2+ and Si4+ cations varied in the x = 0.13–0.52 and y = 0.065–0.5 ...
Vitalii Gorbenko +7 more
doaj +1 more source
Sol-Gel Synthesis and Piezoelectric and Structural Properties of Zr –rich PZT Nanoparticles [PDF]
Lead zirconate titanate (PZT) nanopowders with spherical-shaped morphology, perovskite structure and an average size of 20 nm were successfully synthesized.
Seyed Mohammad Taheri Otaqsara +2 more
doaj +1 more source
Large enhancement of the electrocaloric effect in PLZT ceramics prepared by hot-pressing
In this contribution, we demonstrate the optimization of the microstructures of the Pb0.85La0.1(Zr0.65Ti0.35)O3 (PLZT) relaxor ferroelectric ceramics and subsequent enhancements in their polarization and electrical resistivity by using a hot-pressing ...
Guangzu Zhang +9 more
doaj +1 more source
Structural and abnormal electrical properties of excess PbO-doped lead lanthanum titanate thin films [PDF]
Lead lanthanum titanate (PLT) thin films with excess PbO (from 0 to 20 mol%) were prepared by a metal-organic decomposition process. The ferroelectric properties and current-voltage (C -V ) characteristics of PLT films were investigated as a function of the excess PbO.
Song, Zhitang +6 more
openaire +2 more sources
Effect of PbO excess on the formation of lead magnesium niobate perovskite by the columbite method
The effect of lead excess on the pyrochlore-type formation in Pb(Mg1/3Nb2/3)O3 (PMN) powders has been investigated. The polymeric precursor method was used in the synthesis of the columbite in association to the partial oxalate method to synthesize the PMN powder samples.
Cavalheiro, A. A. +5 more
openaire +2 more sources
We report on large-distance rf-magnetron sputtering as a competitive alternative to pulsed laser deposition and off-axis sputtering for the growth of epitaxial PbZr0.52Ti0.48O3 (PZT) thin films.
Philipp M. Leufke +4 more
doaj +1 more source

