The Cutting Edge Geometric Optimization of the PCBN Tool for the Machining of Cast Iron [PDF]
MicromachinesThe turning process is the main machining task in brake disc production, and the PCBN tool is the most suitable type of cutting tools in the machining of brake discs made of cast iron. The edge geometric optimization of the PCBN tool is the key factor to
Xian Wu +5 more
doaj +5 more sources
Cutting performance of micro-textured PCBN tool [PDF]
Nanotechnology and Precision Engineering, 2021 To study the effect of micro-texture on the cutting performance of polycrystalline cubic boron nitride (PCBN) tools, five types of micro-textures (circular pits, elliptical grooves, transverse grooves, composite grooves, and wavy grooves) were applied to
Lin Fan +3 more
doaj +3 more sources
Cutting Performance and Wear/Damage Characteristics of PCBN Tool in Hard Milling
Applied Sciences, 2019 In the intermittent machining of hardened steel for the die and mold industry, determining how to reduce the wear of PCBN (Polycrystalline Cubic Boron Nitride) tools and improve their machining efficiency and quality is an important subject.
Haining Gao, Xianli Liu, Zhitao Chen
doaj +4 more sources
Research on PCBN Tool Dry Cutting GCr15 [PDF]
Machines, 2018 This paper is based on the theoretical analysis designs of a dry cutting orthogonal test in order to study a phenomenon that the radial force is larger than the main cutting force when a PCBN (polycrystalline cubic boron nitride) tool hard turns GCr15 ...
Qinghua Li +3 more
doaj +3 more sources
Failure and Control of PCBN Tools in the Process of Milling Hardened Steel [PDF]
Metals, 2019 The polycrystalline cubic boron nitride (PCBN) milling tool can be used in the mold industry to replace cemented carbide tools to improve machining efficiency and quality. It is necessary to study the tool wear and failure mechanism to increase machining
Guangyue Wang +3 more
doaj +3 more sources
The Effect of Material Microstructures on Tool Edge Preparation of PCBN Cutting Tools [PDF]
MicromachinesPCBN tools are widely used in the machining of ferrous metals. Tool edge preparation is a crucial procedure in the tool preparation process that directly affects tool performance.
Zhiping Huang +3 more
doaj +2 more sources
Preparation and cutting performance study of YSZ-toughened PcBN superhard tools. [PDF]
RSC Adv, 2023 Titanium alloy, as a recognized difficult-to-cut material, places higher demands on the performance of cutting tools.
Yue Y, Zhu Y, Li Z.
europepmc +3 more sources
Cutting parameter-tool material interaction on PcBN tool wear behaviour in ductile iron machining [PDF]
Scientific ReportsIn response to the increasing requirements for the processing quality and precision of ductile iron parts under the trend of automotive lightweighting and emission reduction, this study systematically investigated the wear behavior and cutting parameter ...
Pengfei Wang +4 more
doaj +2 more sources
Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 [PDF]
Scientific Reports, 2023 Orbital friction stir welding (FSW) has been applied to clad pipes, which is certainly of interest to the oil and gas industry. In this context, an FSW system capable of performing sound joints in one pass with full tool penetration was developed ...
C. V. Amavisca +7 more
doaj +2 more sources
Bi-layer cBN-based composites reinforced with oxide and non-oxide microfibers of refractory compounds [PDF]
Scientific ReportsResearch into new composites utilizing cubic boron nitride (PcBN) shows promise for enhancing cutting tool performance. The unique properties of these materials stem from the addition of microfibers made of refractory compounds to their structure.
Serhiy Klymenko +8 more
doaj +2 more sources