Results 11 to 20 of about 16,820 (310)
Scientific Reports, 2023 This work studies high-performance laminate composite materials made of graphite and poly(ether-ether-ketone) (PEEK). The main objective was to enhance graphite's inherent properties by the addition of PEEK to produce materials with improved thermal and ...
Bakytzhan Sariyev +5 more
doaj +1 more source
Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites
Applied Sciences, 2020 Poly-ether-ether ketone (PEEK) is a great potential thermoplastic in industry and medical treatment and health. In this work, PEEK/graphene oxide (GO) and PEEK/MoS2 composites were prepared by a novel hot isostatic pressing method.
Yutao Yan +3 more
doaj +1 more source
Designs, 2023 Three-dimensional printing or additive manufacturing (AM) has enabled innovative advancements in tissue engineering through scaffold development. The use of scaffolds, developed by using AM technology for tissue repair (like cartilage and bone), could ...
Rajesh Surendran +5 more
doaj +1 more source
Materials & Design, 2022 Comprehensive mechanical properties (high strength, good fatigue resistance and tunable stiffness) are significant for large and load-bearing implants, but still remain a challenge in practical applications.
Xu Chen +7 more
doaj +1 more source
Fabrication and Characterization of PEEK/PEI Multilayer Composites [PDF]
Polymers, 2020 Polyetheretherketone (PEEK)/polyetherimide (PEI) blends (50/50, v/v) keeping the crystal phase of PEEK have been manufactured by alternate PEEK/PEI layer stacking. This strategy avoided the complete miscibility of both polymers, keeping layers of PEEK and PEI unmixed along the sample thickness, as well as promoting the formation of a smooth interfacial
Ángel Alvaredo-Atienza +4 more
openaire +3 more sources
Accelerated degradation of polyetheretherketone and its composites in the deep sea [PDF]
Royal Society Open Science, 2018 The performance of polymer composites in seawater, under high hydrostatic pressure (typically few tens of MPa), for simulating exposures at great depths in seas and oceans, has been little studied.
Hao Liu +3 more
doaj +1 more source
Materials Research Express, 2021 Fused deposition modeling (FDM) provides a promising technique for the small-batch fabrication of highly customized objects. The required performance of FDM far exceeds the performances of conventional manufacturing methods.
Qili Sun +6 more
doaj +1 more source
Photopyroelectric response of PTCa/PEEK composite [PDF]
Review of Scientific Instruments, 2011 A pyroelectric composite made of calcium modified lead titanate ceramic and polyether–ether–ketone high performance polymer was obtained in the film form by hot pressing the ceramic/polymer mixture into the desired composition. After polarization with a suitable electric field, a ceramic composite film (60% vol.) exhibited a pyroelectric figure of ...
Estevam, Giuliano Pierre +2 more
openaire +3 more sources
Melt-Blended Multifunctional PEEK/Expanded Graphite Composites
Frontiers in Materials, 2021 In this work, antistatic, high-performance composites of poly (ether ether ketone) (PEEK) and concentrations of 0.5–7 vol% expanded graphite (EG) were fabricated via twin-screw extrusion and injection moulding at mould temperatures of 200°C.
Mozaffar Mokhtari +4 more
doaj +1 more source
Polymer Testing, 2021 A change in the crystallinity of short-carbon-fiber-reinforced polyether ether ketone (CF/PEEK) composites has a significant effect on the shrinkage deformation characteristics and mechanical properties of the components that are fabricated using 3D ...
Dong Yang +4 more
doaj +1 more source