Results 51 to 60 of about 7,180 (207)

Tribological Behavior of Additively Manufactured Dual‐Material Polymer Composites

open access: yesPolymer Composites, EarlyView.
Layered architecture, tribological performance, and wear mechanisms of additively manufactured dual‐material hybrid polymer composites. ABSTRACT This study presents a novel material design approach for wear‐resistant sandwich‐structured hybrid composites fabricated using dual‐nozzle fused deposition modeling (FDM). By co‐printing commercially available
Zhiwang Li   +3 more
wiley   +1 more source

Mechanical Properties of PETG Fibres and Their Usage in Carbon Fibres/Epoxy Composite Laminates [PDF]

open access: yes, 2018
This paper reports on a melt-spinning process of glycol-modified poly(ethylene terephthalate) PETG and regranulate of PETG. The effect of the processing temperature and winding reel velocity on the diameters of fibres was examined. It was observed with a
Latko-Durałek, P.   +7 more
core   +1 more source

Morphology, Mechanical Properties, and Biodegradability of Modified Thermoplastic Starch/PETG Blends with In Situ Generated Graft Copolymers

open access: yes, 2023
This paper reports on synthesis of modified thermoplastic starch (MTPS) and glycol-modified polyethylene terephthalate (PETG) blends in a twin-screw extruder.
Ramani Narayan, Apoorva Kulkarni
core   +1 more source

Avaliação do PETG como material para imobilizadores utilizados em radioterapia para cabeça e pescoço

open access: yesBrazilian Journal of Radiation Sciences, 2020
No planejamento do tratamento radioterápico do câncer de cabeça e pescoço, o radioncologista pode indicar o uso de uma prótese intraoral para facilitar a técnica de radioterapia e reduzir a toxicidade do tratamento.
Heitor Ribeiro Birnfeld   +4 more
doaj   +1 more source

Multifunctional Acrylonitrile Styrene Acrylate/Cuprous Oxide Nanocomposites in MEX 3D Printing: Rheological, Thermomechanical and Antibacterial Metrics

open access: yesPolymer Composites, EarlyView.
Acrylonitrile Styrene Acrylate/Cuprous Oxide Nanocomposites with enhanced mechanical properties and biocidal efficasy in MEX 3D Printing. ABSTRACT To address the critical need for robust and self‐sterilizing materials for challenging environments, this research introduces the use of cuprous oxide (Cu2O) nanoparticles in weatherproof acrylonitrile ...
Nectarios Vidakis   +8 more
wiley   +1 more source

Prediction of the tensile strength of FDM specimens based on Tsai Hill criteria

open access: yesFracture and Structural Integrity
This study investigates the mechanical behavior of 3D-printed polyethylene terephthalate glycol (PETG) polymer specimens subjected to tensile and shear testing, with a particular focus on the influence of raster orientation and shell contour.
Cosmin Florin Popa   +2 more
doaj   +1 more source

Mechanical and Impact Response of Adhesively Bonded ASA/PA12 Sandwich Structures Produced by Fused Filament Fabrication

open access: yesPolymer Engineering &Science, EarlyView.
Adhesively bonded ASA/PA12 FFF sandwich structures reveal that interfacial compliance governs mechanical performance. Cyanoacrylate enhances strength but induces brittle failure, while polyurethane improves ductility and impact resistance, demonstrating that adhesive properties and stacking sequence are critical design parameters for optimizing multi ...
Berkay Ergene   +3 more
wiley   +1 more source

Effect of geometry and surface distribution of holes on sound and light absorption properties of 3D-printed PETG materials

open access: yes, 2023
Noise and lighting are significant factors that have an impact on our health, environment, production quality, etc. The purpose of this paper is to investigate sound and light absorption properties of 3D-printed polyethylene terephthalate glycol (PETG ...
Nevřela, Martin   +3 more
core   +1 more source

Friction‐Corrected In‐Situ Viscosity Measurement in Material Extrusion: A Force‐Based Method Validated Against Capillary Rheometry Using Identical Nozzle Geometry

open access: yesPolymer Engineering &Science, EarlyView.
In the filament force measurement (FFM), the friction of the solid filament, determined in an open‐bore reference, is subtracted from the measured extrusion force to obtain the capillary force. The resulting apparent viscosity is compared with high‐pressure capillary rheometry (HPCR) using the identical printer nozzle in both instruments.
Philipp Beier   +5 more
wiley   +1 more source

Characterization of the orf31-petG gene cluster from the plastid genome of Populus deltoides

open access: yes, 1997
The orf31-petG gene cluster is located approximately 1.2 kb away from the psbEFLJ operon in the chloroplast genome of Populus deltoides. The orf31 (ycf7 encodes an unidentified polypeptide while the petG gene encodes subunit V of an important component ...
Naithani, Sushma   +2 more
core   +1 more source

Home - About - Disclaimer - Privacy