Results 171 to 180 of about 6,230,450 (205)

Evaluation of PLA and PETG as 3D-Printed Reference Materials for Compressive Strength Testing

open access: yesMaterials
This study explores the feasibility of using 3D printing technology to fabricate reference materials for validating compressive strength measurements in construction laboratories. Polylactic acid (PLA) and polyethylene terephthalate glycol-modified (PETG) were selected due to their widespread availability and use in fused deposition modeling (FDM).
Bartosz Budziński, Karol Federowicz
exaly   +3 more sources

Cold Programming of Ordered Porous PETG 4D Printed by Material Extrusion

Archives of Civil and Mechanical Engineering
Mostafa Baghani   +2 more
exaly   +2 more sources

4D Printing Thermo-Magneto-Responsive PETG-Fe3O4 Nanocomposites With Enhanced Shape Memory Effects

open access: yesApplied Materials Today
In this groundbreaking study, Polyethylene Terephthalate Glycol (PETG)-Fe3O4 nanocomposites were developed for 4D printing, incorporating iron oxide (Fe3O4) nanoparticles into PETG matrix.
Mahdi Bodaghi   +2 more
exaly   +2 more sources

Influence of Infill Structure Shape and Density on the Mechanical Properties of FDM 3D-Printed PETG and PETG+CF Materials

open access: yesAdvanced Technologies & Materials
This paper investigates the impact of infill structure shape and density on the mechanical properties of Fused Deposition Modelling (FDM) 3D-printed materials, specifically PETG and PETG reinforced with carbon fibers (PETG+CF). The research aims to optimize additive manufacturing processes by examining how different infill geometries—hexagonal ...
Emine Hozdić, Elvis Hozdić
exaly   +2 more sources

Effect of in vitro aging by water immersion and thermocycling on the mechanical properties of PETG aligner material

Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie, 2019
The mechanical properties of orthodontic aligners made from thermoplastic polymers decrease over time in the intraoral milieu. However, there is a lack of information on this topic in the literature. Thus, the elastic properties of polyethylene terephthalate glycol (PETG) aligner films were investigated in vitro under extreme temperature changes ...
Benjamin A. Ihssen   +3 more
openaire   +2 more sources

Experimental Analysis of Mechanical properties of PETG Material 3D Printed Material by Using Fused Deposition Modelling Technique

2020
{"references": ["Steve Upcraft and Richard Fletcher (2003), \"The Rapid Prototyping Technologies\", Assembly Automat., ISSN: 0144-5154, Volume 23, Issue 4, pp. 318-330, DOI: 10.1108/01445150310698634.", "Ian Gibson, David W. Rosen and Brent Stucker (2010), \"Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing\", New ...
Prajwal P. Agarwal   +4 more
openaire   +1 more source

On the optimized 3D printing and post-processing of PETG materials

MRS Communications, 2022
Gillian Holcomb   +3 more
openaire   +1 more source

Investigation on Mechanical Properties of 3D Printed PETG Material

2022
T. Malyadri   +2 more
openaire   +1 more source

An experimental investigation on the free vibration analysis of PETG material processed by fused deposition modeling

Rapid Prototyping Journal
Purpose This study aims to investigate the effects of infill ratio and infill pattern parameters on the dynamic mechanical properties of polyethylene terephthalate glycol (PETG) printed structures. Design/methodology/approach The PETG printed ...
Özkan Özbek   +3 more
openaire   +1 more source

A comparative study of recycled PET, PETG, and virgin opaque PET for material extrusion

Materials Research Proceedings
Abstract: Additive manufacturing using material extrusion (MEX) is a widely used technology that facilitates the creation of durable, lightweight, and stable components for various applications. Polyethylene terephtalate (PET), the most used plastic for bottles, cannot be printed due to inadequate rheological properties. This study aims to characterize
openaire   +1 more source

Home - About - Disclaimer - Privacy