Results 61 to 70 of about 6,230,450 (205)

Anisotropy and Defect Tolerance of FFF-Manufactured PETG: A Combined Tensile, Compressive and Mode I Fracture Study

open access: yesApplied Sciences
Fused filament fabrication (FFF) enables the rapid, low-cost manufacture of thermoplastic components, but its layer-by-layer deposition imparts a pronounced, orientation-dependent anisotropy that remains only partially characterised for polyethylene ...
Joseba K. Azcaray   +4 more
doaj   +1 more source

Optimizing 3D printing parameters for PLA and PETG: advancing high-quality skull implant production [PDF]

open access: yesEngineering and Technology Journal
This study investigates the mechanical performance of 3D-printed polylactic acid and polyethylene terephthalate glycol materials by examining the effects of three crucial printing parameters (layer thickness, infill density, and infill pattern).
Reem Khzzal, Marwan Nafaa, Wisam Hamdan
doaj   +1 more source

Tracing the Untraceable: A Review and Discussion on the Forensic Attribution of 3D‐Printed Firearms

open access: yesWIREs Forensic Science, Volume 8, Issue 4, December 2026.
3D‐printed firearms are rapidly evolving and challenge traditional forensic identification. This review highlights emerging attribution methods, from deposition striae and base‐plate marks to polymer and GSR residual traces, firing marks, and quantitative imaging, identifying the research needed to support robust forensic attribution interpretation and
Abi Snasdell   +4 more
wiley   +1 more source

AVALIAÇÃO DO PETG PARA UTILIZAÇÃO EM EMBARCAÇÕES TRANSPARENTES [PDF]

open access: yes, 2023
A impressão 3d tem sido utilizada nos mais diversos setores, empregando uma vasta variabilidade de materiais. Um dos materiais mais utilizados nesta técnica, é o Polietileno Tereftalato Glicol (PETG), um polímero que possui alta transparência. Em virtude
da Costa, Giancarlo Cordeiro   +5 more
core  

Understanding the 3D Printing Workflow: A Technical Primer for Forensic Science

open access: yesWIREs Forensic Science, Volume 8, Issue 4, December 2026.
3D printing, also referred to as additive manufacturing, involves a sequence of steps that transforms digital information into a physical object. Understanding the full process, including its individual stages, materials, and equipment, provides an essential technical foundation for forensic practice and future research.
Stefan Schaufelbühl   +2 more
wiley   +1 more source

Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications

open access: yesPolymers
The study presented herein concerns the mechanical properties of two common polymers for potential biomedical applications, PLA and PETG, processed through fused filament fabrication (FFF)—Material Extrusion (ME). For the uniaxial tension tests carried out, two printing orientations—XY (Horizontal, H) and YZ (Vertical, V)—were considered according to ...
Rui F. Martins   +9 more
openaire   +2 more sources

Circularity in 3D Printing with Poly(Ethylene Terephthalate Glycol): Copolymer Composition Dependent Degradation During Recycling

open access: yesMacromolecular Materials and Engineering
Reduced environmental impact is commonly cited as a driver for additive manufacturing, but non‐circular end‐of‐life disposition of the printed materials reduces these advantages.
Sierra F. Yost   +2 more
doaj   +1 more source

Mechanical and Electrical Properties of Polyethylene Terephthalate Glycol/Antimony Tin Oxide Nanocomposites in Material Extrusion 3D Printing

open access: yesNanomaterials
In this study, poly (ethylene terephthalate) (PETG) was combined with Antimony-doped Tin Oxide (ATO) to create five different composites (2.0–10.0 wt.% ATO).
Markos Petousis   +9 more
doaj   +1 more source

Optimizing Charpy Impact Strength of Material‐Extruded PLA Through Layer Height, Raster Angle, and Infill Geometry

open access: yesJournal of Applied Polymer Science, Volume 143, Issue 44, November 20, 2026.
Charpy impact performance of material‐extruded PLA is governed by the coupled effects of layer height, raster angle, and infill geometry. Full‐factorial testing identifies layer height as the dominant factor and reveals a strong layer‐height–raster‐angle interaction.
Yazan Mashaki   +4 more
wiley   +1 more source

Valorization of Biochar as a Reinforcement Agent in Polyethylene Terephthalate Glycol for Additive Manufacturing: A Comprehensive Content Optimization Course

open access: yesJournal of Manufacturing and Materials Processing
This study aimed to develop a biochar-modified polyethylene terephthalate glycol (PETG) composite for 3D printing. Biochar prepared from olive tree prunings was compounded with PETG at different loadings and then processed into filaments through a ...
Nikolaos Bolanakis   +8 more
doaj   +1 more source

Home - About - Disclaimer - Privacy