Results 101 to 110 of about 6,919 (240)

A Review of Advances in Composite Materials, Structural Optimization, and Machine Learning for Wind Turbine Blades: Challenges and Future Perspectives

Polymer Composites, EarlyView.
Overview of the holistic engineering lifecycle and core research pillars for wind turbine blades. ABSTRACT This paper reviews recent advancements across the lifecycle of wind turbine blades, focusing on three interconnected areas: advanced composites, structural optimization, and machine learning (ML) diagnostics. In materials, we highlight progress in
Kemal Hasirci, Denizhan Yavas, Alaeddin Burak Irez   +2 more
wiley   +1 more source

Biodegradable Dual‐Material 4D‐Printed Scaffolds With Tunable PLA/PEG Ratios for Mandibular Bone Regeneration

Polymer Engineering &Science, EarlyView.
Schematic representation of the fabrication and application concept of biodegradable dual‐material 4D‐printed PLA/PEG scaffolds for mandibular bone regeneration. ABSTRACT In this study, biodegradable dual‐material 4D‐printed scaffolds with tunable poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) ratios were designed, fabricated, and systematically ...
Meltem Eryildiz
wiley   +1 more source

Investigating the Performance of Polytetrafluoroethylene and Polyoxymethylene Creasing Rules in the Package Conversion of Coated Paperboard

Packaging Technology and Science, EarlyView.
Two sets of creasing tools were designed and machined from polytetrafluoroethylene (PTFE) and polyoxymethylene (POM) in this study to improve the creasability of commercial dispersion‐coated paperboard. Their performance was evaluated by measuring the oil and grease resistance of the samples before and after creasing/folding and comparing the results ...
Roman Lev, Antti Pesonen, Johanna Lyytikäinen, Panu Tanninen, Ville Leminen   +4 more
wiley   +1 more source

Exploiting Device Deformability for Fluid and Particle Manipulation

Small, EarlyView.
Deformable devices enable fluid and particle manipulation modes that are inaccessible to rigid platforms. This review examines soft materials and architectures that translate controlled deformation into microscale fluid operations such as pumping, valving, mixing, and particle handling.
Zhiyang Hong, Xiaoyue Kang, Dan Yuan, Nam‐Trung Nguyen, Jun Zhang   +4 more
wiley   +1 more source

Physical Anchoring‐Assisted Mechanically Guided Assembly for Material‐Independent 3D Mesostructures

Small, EarlyView.
Conventional mechanically guided 3D assembly relies on selective chemical bonding between 2D precursors and elastomeric substrates, imposing fundamental limitations on material compatibility and scalability. Here, we present a physically anchored, buckling‐guided assembly platform based on a rod array patterned elastomeric substrate (RPES).
Yeonhee Heo, Pei Liu, Jeongmin Yoo, Jae Hyuk Hwang, Gooyoon Chung, Dong‐Gyun Kim, Raudel Avila, Yoonseok Park   +7 more
wiley   +1 more source

Research on the Axial Compression Performance of Double C-Section Partially Encased Composite Columns. [PDF]

Materials (Basel)
Zhou M, Qin L, Wen X, Wang F, Weng G.
europepmc   +1 more source

Low‐Cost Ambient Pressure Drying Approach for Highly Porous Nanomaterial Structures

Small Methods, EarlyView.
We propose a simple, low‐cost method to dry highly porous nanomaterial structures at ambient temperature and pressure. Using low surface tension solvents, this technique minimizes capillary forces, preventing pore collapse and material shrinkage. This bypasses the need for expensive and size‐limiting critical point drying, enabling scalable production ...
Erik Greve, Pia Pooker, Jan‐Ole Stern, Rainer Adelung, Valeria Nicolosi, Dahnan Spurling   +5 more
wiley   +1 more source

Ultrahigh Stiffness and Energy Absorption Properties of Isotropic Metallic Closed Cell Microlattices. [PDF]

Small
Lim DKJ, Lai CQ.
europepmc   +1 more source

Innovative development and structural behavior of hollow columns using inflatable molds

Structural Concrete, EarlyView.
Abstract This study introduces a novel approach for constructing hollow columns using precast (PC) methods enhanced by inflatable air tubes as internal molds. The proposed method addresses practical challenges in conventional hollow column construction, such as limited constructability, high production cost, and interference between internal molds and ...
Soo Hyung Kim, Dohak Kim, Jeongun Lee, Yun Mook Lim   +3 more
wiley   +1 more source

Shear Instability Control of Hybrid Small-Scale Plates Embedded in a Polymer Matrix via Shape Memory Alloy Nanofibers. [PDF]

Micromachines (Basel)
Farajpour MR, Danesh M, Shokrani MH, Farajpour A.   +3 more
europepmc   +1 more source