Results 211 to 220 of about 207,695 (262)

The production of porcelain for electrical insulation — IV

Journal of the American Institute of Electrical Engineers, 1923
This article contains several excerpts taken from papers presented at recent meetings of the San Francisco and Los Angeles Sections by Dr. Joseph A. Jeffery on “Modern Methods of Firing High-Voltage Porcelain.” The pyrochemical reactions which take place during firing have been described1.
openaire   +1 more source

Developing a high strength physico-mechanical and electrical properties of ceramic porcelain insulator using zirconia as an additive

Materials Research Express, 2018
In this article, the effects of sintering on the mechanical and electrical properties of ceramic porcelain insulator reinforced by zirconia (ZrO2) particles are studied for the low frequencies (20 Hz–1 MHz). The samples were prepared for varying contents
N. S. Mehta, J C Pandey, Neeraj Pandey, R. Pyare, M. R. Majhi   +4 more
semanticscholar   +1 more source

Simulation Study on the Cause of Diameter Distribution of Contamination Particle on Porcelain Insulator Surface in High Voltage Electrostatic Field

IEEE International Conference on High Voltage Engineering and Application, 2018
Particle diameter distribution on insulator surface has important influence on the surface leakage current and pollution flashover voltage. This paper found that particle diameter distribution on porcelain insulator surface used on high voltage ...
Yunpeng Jiang, Lee Li, Rumeng Wang, Ming Lu, Yiwen Jiang, Zehui Liu   +5 more
semanticscholar   +1 more source

The application of porcelain to strain insulators

Proceedings of the American Institute of Electrical Engineers, 1910
Porcelain possesses some qualities which make it a very good material for line insulators and especially strain insulators. It can be moulded and worked into almost any desired form or size; when made of proper materials and properly burned it has practically no depreciation when exposed to the weather, acid fumes or gases, which sometimes create so ...
openaire   +1 more source

Flashover voltage of porcelain insulator under various pollution distributions: Experiment and modeling

Electric power systems research, 2022
A. Salem, K. Y. Lau, Z. Abdul-Malek, S. A. Al-Gailani, Chee Wei Tan   +4 more
semanticscholar   +1 more source

Experimental investigation on flashover characteristics of hollow porcelain insulator under extreme rainfall

Electric power systems research, 2022
Lin Yang, Gaofeng Shang, Zhiqiang Kuang, Yijie Sun, Y. Liao, Y. Hao, Licheng Li   +6 more
semanticscholar   +1 more source

Simulation study on the pollution accumulation of the porcelain insulator in a wind tunnel under direct-current composite electric field

Electric power systems research, 2022
Gongda Zhang, L. Lan, Yu Wang, X. Wen
semanticscholar   +1 more source

Electro-mechanical characterization of alumina-based porcelain insulator doped with BaTiO3 at high temperature with frequency variation

Materials Chemistry and Physics, 2021
N. S. Mehta, S. Dey, M. R. Majhi
semanticscholar   +1 more source

Effects of dynamic deformation of pendant water drops on the electric field between hollow porcelain insulator sheds under extreme rainfall

High Voltage, 2021
Yijie Sun, Lin Yang, Gaofeng Shang, Zhiqiang Kuang, Y. Liao, Y. Hao, Licheng Li   +6 more
semanticscholar   +1 more source

Effects of Alumina on Porcelain Insulators

2019
WOS ...
Aydin, Tuna, Kara, Alpagut
openaire   +2 more sources