Results 1 to 10 of about 6,652 (225)

Flashover Performance Test with Lightning Impulse and Simulation Analysis of Different Insulators in a 110 kV Double-Circuit Transmission Tower

open access: yesEnergies, 2018
The flashover performance of insulators is the foundation of the calculation of precise lightning protection. The material and structure of an insulator affect its flashover performance but the research on the differences in the flashover performance of ...
Yaqi Zhang   +9 more
doaj   +1 more source

Simulation Experiment on Discharge of Plastic Film Overlapping on UHVDC Transmission Lines

open access: yesZhongguo dianli, 2022
In order to study the discharge phenomena of plastic film overlapping on UHV DC transmission lines and explore the cause of flashover fault of a ± 800 kV UHV line, an experimental study is conducted on the flashover characteristics of plastic film with ...
Shenghui WANG   +3 more
doaj   +1 more source

External Insulation Performance under DC Voltages of Polluted Post Insulators for Power Stations in Rainy Weather: A Brief Review and Recent Progress

open access: yesEnergies
The discharge and flashover phenomenon of post insulators in rainy weather has not been given sufficient consideration; however, with the construction of ultra-high voltage power grids, the performance of the external insulation and the ability to ...
Yuxi Dong   +7 more
doaj   +1 more source

AC Flashover Performance of 10 kV Rod-Plane Air-Gapped Arresters under Rain Conditions

open access: yesEnergies, 2018
According to operational experience of power systems, the outdoor insulation strength can be reduced due to the effect of rain. Till now, little work has been done to investigate the flashover performance of air gapped arresters under rain conditions ...
Jiazheng Lu   +4 more
doaj   +1 more source

DC Flashover Dynamic Model of Post Insulator under Non-Uniform Pollution between Windward and Leeward Sides

open access: yesEnergies, 2019
Experience shows that under unidirectional wind or certain terrain, the surface of post insulators is non-uniformly polluted between windward and leeward sides, which affects the flashover characteristics.
Zhijin Zhang   +5 more
doaj   +1 more source

Enhancing flashover strength along oil/pressboard interface using nanofluids

open access: yesAlexandria Engineering Journal, 2020
One of the weakest paths for electrical discharge in power transformers is oil/pressboard interface. So, in this study it is aimed to enhance the flashover resistance of such interface through using the concept of nanofluids.
El-Sayed M. El-Refaie   +3 more
doaj   +1 more source

Study on Influencing Factors of Insulators Flashover Characteristics on the 110 kV True Tower Under the Lightning Impulse

open access: yesIEEE Access, 2018
Lightning strike is the main reason for the transmission line tripping. Studies on the insulator flashover characteristics and the accurate flashover criteria under the lightning impulse are the basis for correctly evaluating the lightning resistance ...
Yongxia Han   +7 more
doaj   +1 more source

AC Surface Flashover and Gas Generation Difference of the Cellulose Insulation Pressboard Immersed in Novel 3-Element Mixed Oil and Mineral Oil

open access: yesIEEE Access, 2019
Surface flashover fault is one of the most challenge issues in oil-cellulose insulation pressboard system used in power transformer. In this study, a comparative study of the AC surface flashover properties of the novel 3-element mixed oil-cellulose ...
Xin Chen   +5 more
doaj   +1 more source

Impulsive Flashover Characteristics and Weibull Statistical Analysis of Gas-Solid Interfaces With Varying Relative Humidity

open access: yesIEEE Access, 2020
This paper informs on the flashover strength of three materials: Delrin (polyoxymethylene), HDPE (high-density polyethylene) and Ultem (polyetherimide) with smooth surface finishes, in zero-grade air at -0.5, 0 and 0.5 bar gauge, and at <; 10%, ~50 ...
Ruairidh W. Macpherson   +4 more
doaj   +1 more source

The synergistic effect of micro structure/nanofiller/superhydrophobicity on the surface flashover

open access: yesHigh Voltage, 2022
The surface flashover is affected by many factors, such as surface roughness, nanofillers and chemical functional groups. In this research study, polyamide mesh was utilised as a scaffold to systematically study the synergistic effect of micro structure ...
Qing Xie   +6 more
doaj   +1 more source

Home - About - Disclaimer - Privacy