Enhancing Microstructural and Mechanical Properties of Ferrous Medium-Entropy Alloy through Cu Addition and Post-Weld Heat Treatment in Gas Tungsten Arc Welding. [PDF]
Yoo S +5 more
europepmc +1 more source
Alkaline electrolysers run more efficiently above 100°C, but today's separators fail beyond 110°C. PTFE membranes made hydrophilic by atomic layer deposition of ZrO2 kept low, fully reversible resistance after 175°C and safe gas purity. Although the coating largely dissolved, conductivity was unaffected, showing it mainly enables wetting.
Rubab Zahra +8 more
wiley +1 more source
A Processing‐Oriented Perspective on Advanced Anode Materials: From Graphite to Si‐Based Systems
This review provides a processing‐oriented framework for graphite and Si‐based anodes, linking material‐specific fabrication routes with manufacturability, scalability, cost, and industrial feasibility. This transition from established graphite processing to emerging Si‐based manufacturing strategies highlights practical pathways toward next‐generation
Seh‐Yoon Lim +3 more
wiley +1 more source
In order to solve the problem of mechanical property deterioration caused by abnormal grain growth (AGG) of traditional Mg-RE-Zr alloy tungsten inert gas welding (TIG) repair welded joints during post-weld heat treatment, the effects of post-weld heat ...
Lei WANG +6 more
doaj +1 more source
POST WELD HEAT TREATMENT OF A HIGH-TEMPERATURE STEEL
After welding, heat treatment of weld joints on components made of high-temperature steels is usually necessary. In this work, several microstructures occurring in the heat affected zone (HAZ) in X10CrMoVNb9-1 high temperature steel were simulated: Coarse grained HAZ (CGHAZ), two different fine grained HAZ (FGHAZ) and intercritical HAZ (ICHAZ).
Vuherer, Tomaž +3 more
openaire +1 more source
PENGARUH KEKERASAN TERHADAP VARIASI POST WELD HEAT TREATMENT PADA PENGELASAN DISSIMILAR METALS ANTARA BAJA KARBON (ST42) DAN BAJA TAHAN KARAT (AISI 304) [PDF]
PENGARUH KEKERASAN TERHADAP VARIASI POST WELD HEAT TREATMENT PADAPENGELASAN DISSIMILAR METALS ANTARA BAJA KARBON (ST42) DAN BAJA TAHANKARAT (AISI ...
Hariyanto, Agus +1 more
core +1 more source
Forced Draught Impact on Externally Venting Flames: An Experimental and Numerical Investigation
ABSTRACT Wind can significantly influence fire development and spread in urban and forest environments causing fatal consequences for the public, the first responders, and the environment. Wind‐driven fires can have a significant impact on structural fires as wind can increase the fire's intensity, development, and flame spread.
Anoop Subramania Warrier +5 more
wiley +1 more source
To tackle the issue of microstructural segregation in nickel-based alloy weldments and the consequent degradation of joint mechanical properties, this study delves into the impacts of two post-weld heat treatment schedules on the microstructural features
HUANG Jufeng +4 more
doaj +1 more source
Post Weld Heat Treatment Optimization of Dissimilar Friction Stir Welded AA2024-T3 and AA7075-T651 Using Machine Learning and Metaheuristics. [PDF]
Insua P +3 more
europepmc +1 more source
Aerogel Fiber: A One‐Dimensional Programmable Porous Matter for Next Thermal Management Materials
Aerogel fibers are redefined as one‐dimensional programmable porous matter, where thermal transport is governed by multiscale pathway engineering. By reconstructing and decoupling transport pathways from molecular to textile scales, these systems integrate insulation, radiative cooling, and adaptive thermal regulation.
Lizhi Ren +6 more
wiley +1 more source

