Results 271 to 280 of about 78,164 (342)
Some of the next articles are maybe not open access.
Molding properties of titanium-based feedstock used in low-pressure powder injection molding
Powder Technology, 2021The moldability of titanium-based feedstocks used in low-pressure powder injection molding process was investigated using numerical simulation and real-scale injections. Feedstock characterization and injection were conducted using a feedstock formulated
Vincent Demers
exaly +2 more sources
Ceramics International, 2021
Two-component micro-powder injection molding (2C-μPIM) is a promising technique to produce bi-material micro-sized components of 3 mol% yttria-stabilized zirconia (3YSZ) and 17-4PH stainless steel (SS 17-4PH).
Al Basir +3 more
semanticscholar +1 more source
Two-component micro-powder injection molding (2C-μPIM) is a promising technique to produce bi-material micro-sized components of 3 mol% yttria-stabilized zirconia (3YSZ) and 17-4PH stainless steel (SS 17-4PH).
Al Basir +3 more
semanticscholar +1 more source
Journal of Magnetism and Magnetic Materials, 2021
NiCuZn ferrite ceramics were prepared by injection molding, debinding and sintering at 1150 °C. The effects of heating rate in thermal debinding on microstructure, bending strength and magnetic properties of sintered samples were investigated by scanning
J. Gu +7 more
semanticscholar +1 more source
NiCuZn ferrite ceramics were prepared by injection molding, debinding and sintering at 1150 °C. The effects of heating rate in thermal debinding on microstructure, bending strength and magnetic properties of sintered samples were investigated by scanning
J. Gu +7 more
semanticscholar +1 more source
Micro Powder Injection Molding
Advanced Engineering Materials, 2000The availability of manufacturing processes suitable for medium and large-scale production of microscale devices is an important requirement for the economic success of microsystems technology. Powder injection molding is on its way to become such an established and economically viable process for manufacturing complex shaped metal or ceramic parts in ...
Piotter, Volker +4 more
openaire +1 more source
Advanced Powder Technology, 2020
The mold filling stage of the low-pressure powder injection molding process and the segregation of the injected part were numerically simulated and validated by an experimental approach.
Mohamed Aziz Ben Trad +4 more
semanticscholar +1 more source
The mold filling stage of the low-pressure powder injection molding process and the segregation of the injected part were numerically simulated and validated by an experimental approach.
Mohamed Aziz Ben Trad +4 more
semanticscholar +1 more source
Powders for metal injection molding
Journal of the European Ceramic Society, 1998Metal injection molding (MIM) uses powders which differ considerably from the ceramics powders used for ceramic injection molding. Metal powders are hardly available in the sub-micron ranges that are almost standard in ceramics. The reason for this lies in the ductility and reactivity of the metals which make it difficult and very expensive to produce ...
T. Hartwig +5 more
openaire +1 more source
Overview of powder injection molding
Advanced Performance Materials, 1996Powder injection molding is a near net-shape technique suitable for the production of moderate to large volumes of small complex components of a wide range of materials such as ceramics, metals and hard metals. It combines the plastics injection molding technique with the power sintering techniques to produce high density parts at close tolerances. The
P.J. Vervoort, R. Vetter, J. Duszczyk
openaire +1 more source
Ferroelectrics (Print), 2020
(Ba0.85Ca0.15)(Hf0.10Ti0.90)O3 (BCHT) lead-free piezoelectric ceramics were synthesized via the powder injection molding process sintered at several temperatures, in which the BCHT ceramics were prepared by the conventional ceramic processing sintered at
Can Wang +4 more
semanticscholar +1 more source
(Ba0.85Ca0.15)(Hf0.10Ti0.90)O3 (BCHT) lead-free piezoelectric ceramics were synthesized via the powder injection molding process sintered at several temperatures, in which the BCHT ceramics were prepared by the conventional ceramic processing sintered at
Can Wang +4 more
semanticscholar +1 more source
Powder Injection Molding of Niobium
Materials Science Forum, 2005Niobium and niobium-based alloys are used in a variety of high temperature applications ranging from light bulbs to rocket engines. Niobium has excellent formability and the lowest specific weight among refractory metals (Nb, Ta, Mo, W, and Re). Powder injection molding of niobium powder was investigated for efficiency of the process.
Ivi Smid, Gaurav Aggarwal
openaire +1 more source
Powder injection molding of complex-shaped aluminium nitride ceramic with high thermal conductivity
Journal of the European Ceramic Society, 2019Aluminum nitride (AlN) is a promising material for heat sinks and microelectronic applications because of the advantages of high theoretical thermal conductivity, high mechanical strength, good electrical insulation, low dielectric constant and low ...
Mingli Qin +8 more
semanticscholar +1 more source