Results 61 to 70 of about 10,673 (220)
Fibres in living cells carry the pre-existing tension (so-called prestress) even without external loading. By changing the prestress, cells are able to control actively their overall mechanical response; it is therefore an important element in cell elasticity.
Vychytil J., Holeček M., Moravec F.
openaire +1 more source
Abstract The acoustic emission (AE) technique has proven to be an effective method for detecting individual wire breaks in prestressed concrete structures affected by stress corrosion cracking (SCC). However, despite its widespread application, the quantitative assessment of AE monitoring reliability and optimal sensor placement remains unresolved ...
Max Fiedler, Steffen Marx
wiley +1 more source
Investigation on the Application of External Prestressing Technology in Bridge [PDF]
To systematically evaluate the long-term performance of external prestressing technology and promote its engineering application, the international journal Prestress Technology of Tongji University recently organized a specialized symposium and conducted
Zhichao Wang, Fangyuan Li
doaj +1 more source
Assessment of Partial Debonding Practice for AASHTO Type Girders [PDF]
Pretensioned girders have been commonly used in bridge construction for years. However, some problems remain that hinder the further application of longer and more heavily prestressed girders. The prestressing force can produce large stresses at both the
Wang, Weijin
core
Abstract During their life cycle, prestressed concrete bridges are prone to wire breaks of their tendons due to fatigue or stress corrosion cracking. However, not all structures show visible cracking on the surface, which would provide timely warning of otherwise invisible damage. Brittle failure may occur.
Noah Sträter +3 more
wiley +1 more source
On the Evaluation of Prestress Loss in PRC Beams by Means of Dynamic Techniques
In the last few decades, prestressing techniques have been used to build very important structures and infrastructures. Since the serviceability and the safety of prestressed reinforced concrete (PRC) elements rely on the effective state of prestressing,
Marco Breccolotti
doaj +1 more source
MODELING MECHANICAL PROPERTIES OF PRESTRESSING STEEL STRAND AT ELEVATED TEMPERATURE [PDF]
Transactions of AIJ. Journal of structural and construction engineeringThe purpose of this paper is to model mechanical properties of prestressing strand at elevated temperature for estimating the strength and deflection of prestressed concrete members ...
林, 成俊 +3 more
core +1 more source
Abstract Ground granulated blast‐furnace slag (GGBS) is a widely used clinker substitute in concrete, recognized for its potential to significantly reduce environmental impacts. However, its application in prestressed concrete remains limited in several countries, mainly due to concerns regarding early‐age mechanical performance and long‐term ...
D. Rolando Baldiviezo +6 more
wiley +1 more source
THE WARM-PRESTRESSING EFFECT IN SILICON
Four-point bend experiments are reported in which precracked silicon specimens were subjected to a high-temperature prestress, then tested at room temperature.
M. Cosgrave, A.S. Booth, S.G. Roberts
core +1 more source
Effective axial strength of laterally strengthened RC pier heads with post‐tensioning method
Abstract This study investigates the structural performance enhancement of reinforced concrete (RC) pier heads laterally strengthened with unbonded post‐tensioning (PT) to accommodate increased design loads following a deck replacement of an existing railway bridge.
Yujae Seo +3 more
wiley +1 more source

