Results 11 to 20 of about 4,609 (261)
Physical and 3D numerical modelling of reinforcements pullout test [PDF]
Scientific ReportsAbstractThis paper reports results of laboratory and 3D numerical modeled pull-out tests with steel ladders and polymeric strip reinforcements. These types of reinforcement are commonly used in reinforced soil walls constructed with concrete facing elements.
Puig Damians, Ivan +4 more
openaire +6 more sources
Anisotropic pullout behavior of bauxite slag-geogrid interfaces [PDF]
Scientific ReportsThis study investigated the anisotropic pullout behavior of dry bauxite slag-geogrid interfaces to address a critical knowledge gap in abandoned bauxite slag deposits reinforcement. Laboratory tests were conducted on coarse sand (slag of 2.5–4.75 mm) and
Ziyang Zhao +3 more
doaj +2 more sources
Case Studies in Construction Materials, 2023 This study analyzes the precious data from the literature on bond strength between concrete and CFRP bars associated with the pullout test. In this regard, an overview of the pullout test and bond stress-slip model, along with a systematic analysis of ...
Mohd Basri Che Bakar +3 more
doaj +1 more source
Inventions, 2022 Executing the obligation of strengthened concrete is essential in investigating load exchanges from concrete to the inner reinforcing bar. The bond–displacement conduct and extreme pullout quality for pullout samples are essential information related to ...
Nadeem Abbas +5 more
doaj +1 more source
Journal of Rock Mechanics and Geotechnical Engineering, 2018 Assessment of the reinforcement behavior of soil under cyclic and monotonic loads is of great importance in the safe design of mechanically stabilized earth walls. In this article, the method of conducting a multistage pullout (MSP) test on the polymeric
Sajad Razzazan +2 more
doaj +1 more source
Polymer Testing, 2022 A knowledge on the pullout forces of degradable craniomaxillofacial screws is essential in designing pediatric cranial implants. Herein, four non-identical commercially available screws composed of different aliphatic polyesters were fixated to 3D ...
Alejandro López +5 more
doaj +1 more source
Modelling of clinching joint pull-out test [PDF]
Computer Methods in Materials Science, 2014 The paper presents the model of the tests on joints obtained by clinching (mechanical joining) high-strength TRIP690 steels. A numerical finite element analysis of the joint with a bottom thickness of 0.6, 0.7 and 0.8 mm was carried out using the MSC ...
Zbigniew Gronostajski +2 more
doaj +1 more source
Influence of construction method on pullout resistance of polymeric strap reinforcement [PDF]
E3S Web of ConferencesThe paper summarizes the results of several pullout box test series carried out on polymeric straps made of polyester (PET) yarns encased in polyethylene (PE) sheaths with a rough, continuous surface.
Moncada Aníbal +4 more
doaj +1 more source
A review of soil and reinforcement interaction testing in reinforced soil by pullout test
Građevinar, 2013 A review of current knowledge on model studies of reinforced soil by pullout test is described in the paper. The pullout test, highly significant in soil-reinforcement characterisation, is described through a review of studies that have contributed to ...
Krunoslav Minažek, Mensur Mulabdić
doaj +1 more source
Biomechanical Comparison of Salvage Pedicle Screw Augmentations Using Different Biomaterials
Applied Sciences, 2022 Allograft bone particles, hydroxyapatite/β-hydroxyapatite-tricalcium phosphate (HA/β-TCP), calcium sulfate (CS), and polymethylmethacrylate (PMMA) bone cement are biomaterials clinically used to fill defective pedicles for pedicle screw augmentation. Few
Yun-Da Li +6 more
doaj +1 more source