Results 71 to 80 of about 21,497 (264)
Pulsed laser deposition of polymer–metal nanocomposites
Abstract Different polymer–metal nanocomposites, metal clusters on a polymer surface and for the first time also polymer/metal multilayers, were pulsed laser deposited at a wavelength of 248 nm. Poly(methyl methacrylate) (PMMA) and Bisphenol A dimeth-acrylate (BisDMA), which strongly differ in their hardness of 3 and 180 N/mm 2 , respectively, were ...
Schlenkrich, Felix +3 more
openaire +2 more sources
An Adaptive Inhibitory WSe2 Transistor for Retinomorphic In‐Sensor Image Processing
Conventional retinomorphic devices typically require deliberate gate‐bias tuning for each illumination condition. In this paper, we demonstrate an adaptive inhibitory WSe2 transistor that uses photo‐induced regime shift between the subthreshold and accumulation modes to achieve decision‐free, intensity‐adaptive image processing within a single pixel ...
Juhwan Baek +12 more
wiley +1 more source
Forward‐Biased Perovskite Photodiodes for In‐Sensor Optical Change Sensing
A forward‐biased perovskite photodiode is introduced as an in‐sensor analog preprocessing unit that uses current balancing between photocurrent and injection current to generate optical changes relative to programmable optical reference levels. The device directly converts reference‐relative optical changes into bipolar current signals, enabling sensor‐
Eungseon Yeon +14 more
wiley +1 more source
Eu‐doped {ZnCdO/ZnO} structures grown on Si are developed, showcasing dual‐functionality controlled by europium doping. While high europium concentration transforms the device into an ultrafast, self‐powered photodetector, low‐doped structures can be used as an optoelectronic synapse.
Igor Perlikowski +3 more
wiley +1 more source
Effects of Laser Irradiation on a Copper Electrodeposition Process and Coating Quality
In this study, a hybrid pulsed laser and electrochemical processing technique was used to deposit a copper coating on a stainless steel substrate. The laser irradiation mechanism in the electrodeposition process was studied by detecting the mechanical ...
Xueren Dai +4 more
doaj +1 more source
Liquid–liquid interface assembly enables the fabrication of solution‐processed MoS2 and WSe2 centimeter‐scale, nanometer‐thick type‐II heterostructures on paper. Interfacial charge separation and hopping‐limited recombination produce rectification and persistent photocharge retention at zero bias.
Aniello Pelella +11 more
wiley +1 more source
Rapid thermal annealing reconstructs the BCFO/Nb:STO interface into an atomically thin reconstructed interfacial layer, which reshapes the tunneling barrier and converts a high‐TER ferroelectric tunnel junction into an intrinsically nonlinear, self‐rectifying device.
Hojin Lee +21 more
wiley +1 more source
Amphoteric Cu‐Doping Leading to High Thermoelectric Performance in p‐Type Bismuth Antimony Telluride
This study shows that Cu plays two opposite roles in p‐type Bi0.5Sb1.5Te3 depending on the processing route. Under thermodynamic‐equilibrium bulk‐synthesis, Cu mainly occupies cation sites, increases hole concentration, preserves mobility, and slightly reduces lattice heat transport. The best‐performing composition among the investigated series reaches
Moritz Thiem +15 more
wiley +1 more source
We present the development and optical characterization of tungsten carbide superconducting nanowire devices for photon detection. They are nanofabricated by direct deposition via pulsed focused ion beam induced deposition (PFIBID) using Tungsten ...
Cristina García-Pérez +6 more
doaj +1 more source
A removable sacrificial polymer layer engineers the thermal boundary condition during nanosecond laser ablation of PET, suppressing heat‐affected‐zone formation without relying on costly ultrafast lasers. This strategy enables deep, high‐aspect‐ratio trenches with no detectable heat‐affected zone, templating silver‐filled mesh electrodes with record ...
Mehdi Zarei +3 more
wiley +1 more source

