Results 61 to 70 of about 56,146 (240)
Ferroelectric memcapacitors enable non‐volatile, voltage‐programmable capacitance tuning for adaptive electronics. A TiN/HfZrO/TiN device stack demonstrates more than eight stable capacitance states within a 24 pF memory window in compact 60 ×$\times$ 60 μm2$\umu{\rm m}^{2}$ devices at low operating voltages.
Deepika Yadav +6 more
wiley +1 more source
Magnetic Effects on Dielectric and Polarization Behavior of Multiferroic Hetrostructures
PbZr0.52Ti0.48O3/La0.67Sr0.33MnO3(PZT/LSMO) bilayer with surface roughness ~ 1.8 nm thin films have been grown by pulsed laser deposition on LaAlO3(LAO) substrates.
Dussan, Sandra +3 more
core +2 more sources
Real‐Time 3D Ultrasound Imaging with an Ultra‐Sparse, Low Power Architecture
This article presents a novel, ultra‐sparse ultrasound architecture that paves the way for wearable real‐time 3D imaging. By integrating a unique convolutional array with chirped data acquisition, the system achieves high‐resolution volumetric scans at a fraction of the power and hardware complexity.
Colin Marcus +9 more
wiley +1 more source
Bài báo nghiên cứu ảnh hưởng của nồng độ Zn, Nb (ZN) đến nhiệt độ thiêu kết và các tính chất của hệ gốm áp điện Pb0,96Sr0,04(Zr53Ti47)1-x(Zn1/3Nb2/3)xO3 (PSZT-ZN), với x = 0,0 – 2,0.
Nguyễn Văn Thịnh +3 more
doaj
We investigate the thermoelastic response of a nanolayered sample composed of a metallic SrRuO3 (SRO) electrode sandwiched between a ferroelectric Pb(Zr0.2Ti0.8)O3 (PZT) film with negative thermal expansion and a SrTiO3 substrate.
Bargheer, M. +5 more
core +1 more source
PZT/PZT and PZT/BiT Composite Piezo-Sensors in Aerospace SHM Applications: Photochemical Metal Organic + Infiltration Deposition and Characterization [PDF]
The composition of fine-ground lead zirconate-titanate powder Pb(Zr0.52Ti0.48)O3, suspended in PZT and bismuth titanate (BiT) solutions, is deposited on the curved surface of IN718 and IN738 nickel-based supper alloy substrates up to 100 µm thickness. Photochemical metal organic and infiltration techniques are implemented to produce smooth, semi-dense,
Hamidreza Hoshyarmanesh +5 more
openaire +3 more sources
Bioinspired Adaptive Sensors: A Review on Current Developments in Theory and Application
This review comprehensively summarizes the recent progress in the design and fabrication of sensory‐adaptation‐inspired devices and highlights their valuable applications in electronic skin, wearable electronics, and machine vision. The existing challenges and future directions are addressed in aspects such as device performance optimization ...
Guodong Gong +12 more
wiley +1 more source
Honeycomb-based, modular composites with a relative density of 0.3948 and a slenderness ratio Lges/t of 6.48 were fabricated on PZT building blocks connected with a PZT-filled phenyl silicone resin. The macro- and micro-structure, phase composition, and the interface between the two materials were analyzed by SEM and image analysis techniques.
Franziska Eichhorn +4 more
openaire +3 more sources
Schematic showing the leveraging of topology optimization, the printing of a tailored eutectic gallium‐indium liquid alloy electrode, and porous ceramic engineering to simultaneously enhance mechanical durability, stretchability, and sensing sensitivity to produce a highly deformable and stretchable sensor capable of monitoring complex and anisotropic ...
Hanmin Zeng +10 more
wiley +1 more source
The monoclinic phase of PZT ceramics: Raman and phenomenological theory studies
This work reports on the first Raman detection of the tetragonal to monoclinic phase transition in PZT ceramics near morphotropic phase boundary at low temperatures.
A. G. Souza Filho +18 more
core +1 more source

