Results 11 to 20 of about 1,645 (179)
Embrittlement of Molybdenum by Neutron Radiation
JOM, 1955 Commercially pure molybdenum specimens were irradiated in the Materials Testing Reactor for an estimated exposure of 1.9 to 5.9×1020 thermal nvt. Prior to irradiation, the material was ductile in the tension test; whereas after irradiation, it was brittle.
C. A. Bruch +2 more
openaire +2 more sources
Limited field radiation therapy results in decreased bone fracture toughness in a murine model. [PDF]
PLoS ONE, 2018 Fragility fractures are a well-known complication following oncologic radiotherapy, and it is suspected that radiation-induced embrittlement of bone within the treatment field may contribute to fracture risk.
Christopher M Bartlow +3 more
doaj +1 more source
Method for the Calculation of DPA in the Reactor Pressure Vessel of Atucha II
Science and Technology of Nuclear Installations, 2011 One of the limiting factors of the life of a nuclear power plant (NPP) is the state of the reactor pressure vessel (RPV). Embrittlement is the most important effect affecting RPV aging.
J. A. Mascitti, M. Madariaga
doaj +1 more source
Comparison of Маster curve with normative method of estimating WWER-1000 reactor pressure vessel metal fracture toughness [PDF]
Ядерна фізика та енергетикаThe paper considers the generalized temperature dependence of the stress intensity factor KJC in the WWER-1000 reactor pressure vessel metal, which was derived based on the surveillance test data for fracture toughness.
V. M. Revka, L. I. Chyrko
doaj +1 more source
Proton irradiation-decelerated intergranular corrosion of Ni-Cr alloys in molten salt
Nature Communications, 2020 The effects of ionizing radiation on materials often reduce to “bad news”. Radiation damage usually leads to detrimental effects such as embrittlement, accelerated creep, phase instability, and radiation-altered corrosion.
Weiyue Zhou +6 more
doaj +1 more source
Radiation annealing of radiation embrittlement of the reactor pressure vessel steel
IOP Conference Series: Materials Science and Engineering, 2016 Influence of neutron irradiation on RPV steel degradation are examined with reference to the possible reasons of the substantial experimental data scatter and furthermore - nonstandard (non-monotonous) and oscillatory embrittlement behavior. In our glance this phenomenon may be explained by presence of the wavelike component in the embrittlement ...
E Krasikov, V Nikolaenko
openaire +1 more source
Low-temperature radiation embrittlement of copper alloys [PDF]
Journal of Nuclear Materials, 1996 The effect of low-temperature (T{sub irr} less than 0.3. T{sub melt}) irradiation on the tensile properties of copper and precipitation-hardened (PH) and dispersion-strengthened (DS) copper alloys was investigated. Samples were irradiated with fission neutrons at temperatures of 80 to 200{degrees}C to doses of 0.6 to 5 dpa. Irradiation at temperatures
S.A. Fabritsiev +3 more
openaire +1 more source
Ядерна фізика та енергетика, 2019 The results of surveillance-specimens testing of re-irradiated after recovery annealing reactor pressure vessel (RPV) metal of Rivne NPP unit 1 are presented. The radiation strengthening and shift of critical temperature of brittleness for RPV base metal
M. G. Holiak +6 more
doaj +1 more source
Different approaches to estimation of reactor pressure vessel material embrittlement [PDF]
Ядерна фізика та енергетика, 2013 The surveillance test data for the nuclear power plant which is under operation in Ukraine have been used to estimate WWER-1000 reactor pressure vessel (RPV) material embrittlement.
V. M. Revka +3 more
doaj
Приборы и методы измерений, 2023 Innovative production technologies, such as additive synthesis, is inextricably linked with the development of methods for assessing the quality of manufactured products.
T. A. Pratasenia, A. P. Kren
doaj +1 more source