Results 31 to 40 of about 1,036,400 (207)
FibersThis study aims to investigate the behaviour of reinforced concrete (RC) beams strengthened by Carbon Fibre-Reinforced Polymer (CFRP) under static and impact loads. A series of RC beams were tested and categorized into four groups, namely, unstrengthened
Mohamed H. Mussa +2 more
doaj +1 more source
Shear Behaviour of RC Beams: A Numerical Study
International Journal of Computational and Experimental Science and Engineering, 2023 A two-dimensional (2D) nonlinear finite element (FE) model created for reinforced concrete (RC) beams is presented in this paper. The FE model was verified in order to perform further parametric studies on RC beams with and without existing steel shear links. The parameters were tension reinforcement ratio, concrete compression strength, and beam size.
openaire +3 more sources
BuildingsIn order to verify the rationality and feasibility of a demountable and replaceable fabricated RC beam with bolted connection under mid-span compression, one cast-in-place RC beam and four fabricated RC beams were designed and fabricated. Through the mid-
Dongping Wu +3 more
doaj +1 more source
Case Studies in Construction Materials, 2017 Reinforced concrete (RC) flanged beam specimens were tested under incremental cyclic load till failure in flexure. Simultaneously the acoustic emissions (AE) known as transient elastic stress waves released during fracture process in the same specimens ...
R. Vidya Sagar
doaj +1 more source
, 2023 This data set is gathered from many artificial corrosion experiments on reinforced concrete beams. The longitudinal reinforcement area loss varies from approximately 1% to 29% of that measured by weighing the bar.
openaire +1 more source
Experimental investigation of resistance function of RC beam considering membrane effects [PDF]
, 2022 Membrane actions commonly exist in reinforced concrete (RC) elements under flexural deformation, which could significantly increase the ultimate flexural load-bearing capacity and potentially influence the damage mode of the RC element. Most design codes
Hao, Hong +5 more
core +1 more source
Cyclic response of RC beam-column joints reinforced with plain bars: an experimental testing campaign [PDF]
, 2012 Existing reinforced concrete (RC) buildings constructed until the mid-70’s, with plain reinforcing bars, are expected to behave poorly when subjected to earthquake actions.
Costa, A. +3 more
core
Beam-column connections in GFRP-RC moment resisting frames: A review of seismic behaviour and key parameters [PDF]
Glass Fibre Reinforced Polymer (GFRP) bars have emerged as an effective alternative to steel as internal reinforcements in concrete structures. Its application in individual reinforced concrete (RC) members has been widely implemented.
Zhuge, Yan +5 more
core +1 more source
Performance of reinforced concrete beam with cushion subjected to impact loading
Case Studies in Construction Materials, 2022 Many countries are developing new ways to protect Reinforced Concrete (RC) structures under specific risks such as rockfall hazards. Cushioning materials, for example, are using to improve the impact resistance of the RC structures.
Tung Thanh Pham +2 more
doaj +1 more source
Seismic strengthening of beam-column joints with multidirectional CFRP laminates [PDF]
, 2012 An experimental program was carried out to analyse the potentialities of a technique based on the use of multidirectional CFRP laminates (MDL-CFRP) for the seismic repair and strengthening of reinforced concrete (RC) beam-column joints. This experimental
Costa, A. +13 more
core