Results 91 to 100 of about 3,020,549 (269)
Newly developed polymers with intrinsic microporosity (PIMs) were combined with benzo[c][1,2,5]thiadiazole (BTZ) to be used as visible light photocatalytic coatings on the Vortex Fluidic Device (VFD). The VFD's rapid rotation and continuous flow capabilities enhanced singlet oxygen and superoxide radical reactions, achieving a dramatic eightfold ...
Leonardo Amicosante +9 more
wiley +1 more source
Numerical simulation of an explosion in a simple scale model of a nuclear reactor
In the case of a Hypothetical Core Disruptive Accident (HCDA) in a Liquid Metal Fast Breeder Reactor, it is assumed that the core of the nuclear reactor has melted partially and that the chemical interaction between molten fuel and liquid sodium creates
Marie-France Robbe +3 more
doaj
THERMAL-HYDRAULIC ANALYSIS OF IRT-4M IN REACTIVITY INSERTION ACCIDENT AT VR-1 REACTOR
The paper deals with thermal-hydraulic analysis during reactivity insertion accident, i.e. a step increase of nuclear system reactivity by 0.7 eff, at VR-1 Reactor.
Filip Fejt
doaj +1 more source
First Operation Results of a Methanol Demonstration Plant With Real Steel Mill Gases
A demonstration plant with industrial setup regarding length, diameter, boiling water cooling system and gas recycle was initially operated with cleaned blast furnace gas and compared with earlier experiments with bottle gases. Dynamic disturbances from the steel mill and gas cleaning unit were noticed and could be compensated by the control system ...
Johannes Michael Voß, Tim Schulzke
wiley +1 more source
In the ENPRO REUNION project, a manufacturer‐independent modular plant concept was demonstrated by commissioning a pilot plant that integrated modules from different vendors and by expanding the module pool to include extraction and crystallization units.
Laura Marsollek +8 more
wiley +1 more source
To investigate the micro-natural circulation phenomenon within the pressure vessel of a small nuclear reactor during cold shutdown maintenance, a comprehensive reactor pressure vessel model was developed utilizing the RELAP5 3D program.
Fulong Tang +3 more
doaj +1 more source
Optical Multiphase Conductivity Inline Probe: Characterization and Analysis of Foam Structures
A novel inline probe combines optical imaging and electrical conductivity within a shared measurement volume, enabling simultaneous determination of foam structure and composition. The method provides real‐time access to cell size distributions and liquid fractions under process conditions. ABSTRACT For inline process analysis of foams, a novel optical
Marc Hofmann +3 more
wiley +1 more source
This study evaluates how small water impurities—typical in ammonia cracking feedstock—affect catalyst performance at elevated pressures and temperatures. By decoupling permanent degradation from reversible inhibition, the findings highlight trace water as a significant factor for reliable catalyst screening and industrial ammonia cracking scale‐up ...
Bruno V. P. Lago +6 more
wiley +1 more source
Light Water Reactor-Pressure Vessel Surveillance project computer system
A dedicated process control computer has been implemented for regulating the metallurgical Pressure Vessel Wall Benchmark Facility (PSF) at the Oak Ridge Research Reactor.
Merriman, S.H.
core +1 more source
Abstract This study proposes a novel, green, and sustainable method for synthesizing magnetic iron oxides from metallurgical copper slag (CS), leveraging its iron content as a valuable resource. Iron was extracted via acid leaching using edible citric acid (ECA), forming a citrate–iron complex (CSL), which was subsequently thermally decomposed at 300°C
Melisa Portilla‐Sangabriel +4 more
wiley +1 more source

