Results 171 to 180 of about 4,487 (215)

Impact of Trace Water on the Macroscopic Activity of Commercial Ammonia Cracking Catalysts Under Process‐Relevant Conditions

open access: yesChemie Ingenieur Technik, EarlyView.
This study evaluates how small water impurities—typical in ammonia cracking feedstock—affect catalyst performance at elevated pressures and temperatures. By decoupling permanent degradation from reversible inhibition, the findings highlight trace water as a significant factor for reliable catalyst screening and industrial ammonia cracking scale‐up ...
Bruno V. P. Lago   +6 more
wiley   +1 more source

Swelling Mechanism of Rubber Sealing Materials in Methanol Transportation Pipelines. [PDF]

open access: yesMaterials (Basel)
Jiang Z   +6 more
europepmc   +1 more source

Impacts of refining Canadian partially upgraded bitumen: Fluid catalytic cracking

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract In this study, we examine the fluid catalytic cracking (FCC) performance of vacuum gas oil (VGO) from partially upgraded bitumen (PUB), a novel refinery feedstock from Canadian bitumen. FCC experiments were conducted in a lab‐scale FCC unit with VGOs from two different PUBs prepared using thermal cracking and solvent deasphalting, along with ...
Yi Zhang   +3 more
wiley   +1 more source

Hydrogen donor‐assisted visbreaking of Canadian oil sands bitumen

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract High‐viscosity Canadian oil sands bitumen requires processing for efficient transportation and refining. Partial upgrading technologies, primarily based on thermal processing, can effectively reduce, or even eliminate, the use of costly diluent, increase bitumen quality and market value, potentially decrease greenhouse gas (GHG) emissions, and
Yi Zhang, Mohamed Ali, Jinwen Chen
wiley   +1 more source

Review of CFD modelling techniques for single‐phase and multiphase flow in static mixers

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
This review synthesizes computational fluid dynamics (CFD) approaches for static mixers, linking hydrodynamics to pressure drop, particle/droplet distributions, mixing metrics, and heat‐transfer performance to guide modelling choices and design decisions. Abstract Static mixers enable compact and low‐energy intensification.
Jussan Jaeger   +7 more
wiley   +1 more source

Demulsifying agent simplified model for offshore oil wells

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract This article addresses key challenges in offshore petroleum production caused by multiphase flow instabilities, such as slug flow and emulsion formation. Traditionally, severe slugging is mitigated by increasing wellhead backpressure through partial choke valve closure. In this context, a simplified dynamic model—the fast offshore wells model (
Fernanda Bernardi de Souza   +5 more
wiley   +1 more source

Home - About - Disclaimer - Privacy