Results 61 to 70 of about 2,858 (247)

Mechanisms of Roadway Instability and Coupled Control Technology for Working Face Passing Through Fault Zones

open access: yesEnergy Science &Engineering, EarlyView.
This study mainly explores the instability characteristics of roadways near faults in the working face. Taking the 51104 transportation roadway of the 51104 working face in Shengxin Coal Mine as the main research object, through theoretical analysis, borehole inspection, numerical simulation and on‐site mine pressure observation, the instability ...
Shuaifeng Yin   +4 more
wiley   +1 more source

Experimental study of solid RC slabs strengthened on the upper surface

open access: yesRevista IBRACON de Estruturas e Materiais, 2018
The current study presents the results of tests conducted in 5 reinforced concrete slabs (415 cm x 415 cm x 7 cm) in order to experimentally check the possibility of reinforcing their upper surface, as well as to assess the adhesion between the old and ...
C. O. CAMPOS   +3 more
doaj   +2 more sources

Techno‐Economic and Quasi‐Dynamic Load Flow Analysis of a Hybrid Renewable Microgrid for Coastal Industrial Loads

open access: yesEnergy Science &Engineering, EarlyView.
A hybrid PV–wind grid‐connected microgrid for Mongla Port is optimized using HOMER Pro and validated via DIgSILENT quasi‐dynamic load flow. The system achieves a low cost of energy (0.0341 USD/kWh), 70.9% renewable penetration, improved voltage stability, and significant emission reduction, demonstrating a reliable and cost‐effective solution for ...
Md. Behesty Hasan Sagor   +6 more
wiley   +1 more source

Experimental and Numerical Investigations of Blast Resistance of Fiber-Reinforced Concrete Slabs

open access: yesBuildings
Despite extensive research on blast-resistant concrete structures, a clear scientific deficiency remains in the quantitative understanding of how fiber-reinforced concrete slabs behave under blast loading, particularly when experimental and numerical ...
Pradeep Tharanga Kumara Rathnayaka   +4 more
doaj   +1 more source

Finalisation of the European Approach to Assess the Fire Performance of Facades—Brief Information on the Outcome of the Project

open access: yesFire and Materials, EarlyView.
ABSTRACT This research was conducted within the framework of project SI2.825082, funded by the European Commission—DG GROW. The project's objective was to finalise a European approach for assessing the fire performance of façades under medium and large fire exposure conditions.
Péter Tóth   +7 more
wiley   +1 more source

Parametric design method of building structured cabling system oriented to data mining

open access: yesIET Networks, EarlyView., 2022
This paper puts forward the method of secondary development and design software through the research of building structured cabling system (SCS), and uses data mining technology to carry out parametric design of building SCS. Then, the feasibility of the design is tested by comparing the data of the traditional design and the parametric design ...
Bing Wang, Wei Yue
wiley   +1 more source

Bearing capacity of steel-reinforced concrete floor elements before the operation period

open access: yesMagazine of Civil Engineering
The paper reflects the results of a survey and assessment of the technical condition of steel-reinforced concrete floor slabs using the “Hoesch Additiv Decke®” technology.
Bedov Anatoly, Shaposhnikova Yulia
doaj   +1 more source

Charring Behaviour of Mass Timber: A Comparison of Thin Intumescent Coatings and Plasterboard

open access: yesFire and Materials, EarlyView.
ABSTRACT This study compares the charring behaviour of mass timber under varied heating conditions when protected by either different thin intumescent coating types or fire‐rated plasterboard layers. Bench‐scale fire experiments were conducted using the Heat‐Transfer Rate Inducing System (H‐TRIS).
Stavros Spyridakis   +4 more
wiley   +1 more source

Design and Development of a Modular Ballistic Pendulum for High‐Impulse Measurement in Contact and Near‐Field Explosive Loading

open access: yesPropellants, Explosives, Pyrotechnics, EarlyView.
ABSTRACT Measuring impulse from explosive charges in contact and near‐field configurations presents practical challenges due to wide variation in impulse magnitude. Ballistic pendula are widely used for impulse measurement, but many existing designs are limited to narrow operating envelopes or are poorly suited to repeated contact testing and tamped ...
R. Alford   +3 more
wiley   +1 more source

Home - About - Disclaimer - Privacy