Results 1 to 10 of about 16,424 (235)

Torque control of switched reluctance motors [PDF]

open access: yesIEEE Transactions on Magnetics, 2011
This paper presents the performance of an instantaneous torque control method. The simulation and experimental results illustrate the capability of Switched Reluctance Motors (SRM) being used in the motor drive industry. Based on experimental data, the
García García, Alfonso   +3 more
core   +4 more sources

Research on Torque Ripple Suppression of Switched Reluctance Motor by Double T-shaped Poles

open access: yesJournal of Harbin University of Science and Technology, 2023
:Vibration and noise are the urgent problems to be solved in switched reluctance motor. One of the main reasons is the torque pulsation caused by the sudden change of electromagnetic tangential force.
ANZhiguo   +4 more
doaj   +1 more source

A Study on Core Skew Considering Manufacturability of Double-Layer Spoke-Type PMSM

open access: yesEnergies, 2021
The spoke-type permanent magnet synchronous motor (PMSM), which is a general ferrite magnetic flux-concentrated motor, has a low portion of reluctance torque at the total torque magnitude. Therefore, as a way to increase the reluctance torque, there is a
Dong-Woo Nam   +6 more
doaj   +1 more source

Minimization of torque pulsations by using a novel fuzzy controller in SRM drives for EV applications

open access: yesHeliyon, 2023
In recent years, the applications of Changed Reluctance Motors have expanded, from control system stepping motors to high torque e-vehicle applications. High-speed operation and a light-weight driving motor are required for an effective electric vehicle ...
S. Kudiyarasan   +2 more
doaj   +1 more source

Torque ripple minimization of a switched reluctance motor [PDF]

open access: yesProceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95, 1995
This paper presents a simple technique to minimize torque ripple of a switched reluctance motor. The technique is based on the control of the sum of the square of the phase currents by using only two current sensors and analog multipliers. The simulation results and a proposed circuit are given.
BILGIC, MO, OZBULUR, V, SABANOVIC, A
openaire   +3 more sources

Determining the Control Objectives of a Switched Reluctance Machine for Performance Improvement in Generating Mode

open access: yesIEEE Open Journal of Industry Applications, 2023
This article presents a methodology to determine the control objectives of conduction angle control in generating mode of operation in a switched reluctance machine.
Ahsan Zahid, Berker Bilgin
doaj   +1 more source

Influence of Control and Structure Parameters on the Starting Performance of a 12/8 Pole Switched Reluctance Motor

open access: yesEnergies, 2020
To investigate the influence of control and structure parameters on the starting performance of a switched reluctance motor, a 12/8 pole switched reluctance motor is analyzed in this paper.
Jichao Han   +4 more
doaj   +1 more source

Design and Simulation Analysis of Stator Slots for Small Power Permanent Magnet Brushless DC Motors

open access: yesInternational Transactions on Electrical Energy Systems, 2023
With the development of power electronics technology, permanent magnet brushless DC motors have developed rapidly and are now widely used in electric vehicles, flywheel energy storage, rail transit, and other applications.
Chuanhui Zhu   +4 more
doaj   +1 more source

Comparative study on torque characteristics of permanent magnet synchronous reluctance motors with different axial hybrid rotors

open access: yesEnergy Reports, 2022
An axial hybrid permanent magnet synchronous reluctance machine (AHPM-SynRM) is proposed in this paper. The structure is a combination of synchronous reluctance rotor and two permanent magnet rotors.
Zheming Fan   +4 more
doaj   +1 more source

Control System for a Single-Phase DC-Excited Flux-Switching Machine With a Torque Ripple Reduction Scheme

open access: yesIEEE Access, 2020
Single-phase dc-excited flux-switching machines (DCFSMs) are suitable for operations in harsh environments and cost-sensitive applications due to their rugged structure.
Zih-Cing You, Sheng-Ming Yang
doaj   +1 more source

Home - About - Disclaimer - Privacy