Results 281 to 290 of about 1,083,140 (374)

Adjustment of Coatings Morphology and Particle Distribution of Layered Silicates by Freeze‐Drying for Improved Gas Barriers

open access: yesAdvanced Engineering Materials, EarlyView.
Freeze‐drying of layered silicate is the key to get coatings with superior gas barrier. Freeze‐drying of layered silicates modified with dodecylamine (DDA) is a highly effective technique for the preparation of barrier pigments that significantly mitigate the permeation of oxygen, water vapor, and hydrogen through polymer films containing these ...
Joshua Lommes   +4 more
wiley   +1 more source

X‐Ray Tomography Analysis of Damage Mechanisms in Metal Matrix Syntactic Foams During Compression

open access: yesAdvanced Engineering Materials, EarlyView.
In situ synchrotron X‐ray tomography is used to investigate the internal damage mechanisms of AlSi12 metal matrix syntactic foam with ceramic hollow spheres during compressive loading. It is concluded that a homogeneous distribution of the second‐phase filler material results in a sequential collapse in a localized region; this leads to controlled and ...
Indrajeet Tambe   +8 more
wiley   +1 more source

Trace Nickel Activated Biphasic Core‐CuOii/Shell‐CuOi Secondary Microspheres Enable Room Temperature Parts‐Per‐Trillion‐Level NO2 Detection

open access: yesAdvanced Engineering Materials, EarlyView.
An idea of designing novel sensors is proposed by creating appropriate Schottky barriers and vacancies between isomorphous Core‐CuOii/ Shell‐CuOi secondary microspheres and enhancing catalytic and spill‐over effects, and electronegativity via spontaneous biphasic separation, self‐assembly, and trace‐Ni‐doping.
Bala Ismail Adamu   +8 more
wiley   +1 more source

A primal-dual data-driven method for computational optical imaging with a photonic lantern. [PDF]

open access: yesPNAS Nexus
Santos Garcia C   +6 more
europepmc   +1 more source

An Inkjet‐Printed Platinum‐Based Temperature Sensing Element on Polyimide Substrates

open access: yesAdvanced Engineering Materials, EarlyView.
An inkjet‐printed, meander‐structured, nanoparticle platinum‐based resistive temperature sensors on polyimide substrates are demonstrated as proof‐of‐concept. Optimized sintering at 250°C enables stable conductive structures. The Pt100‐ and Pt1000‐type sensors exhibit linear resistance–temperature characteristics with stable TCR in the 20°C–80°C range,
Shawon Alam   +6 more
wiley   +1 more source

The geometry and dimensionality of brain-wide activity. [PDF]

open access: yesElife
Wang Z   +9 more
europepmc   +1 more source

Home - About - Disclaimer - Privacy