Results 31 to 40 of about 66,379 (304)
Inclusions in low carbon aluminum killed steel slabs at high casting speed
工程科学学报, 2016 Inclusions in the surface of low carbon aluminum killed steel slabs cast at high casting speed were analyzed by Aspex automated scanning electron microscopy in a large area.
YUAN Peng +4 more
doaj +1 more source
Experimental Tests of Fiber-Reinforced Concrete Slabs and Comparison of Deformations Using 3D Graphs
Civil and Environmental Engineering, 2021 The presented article deals with experimental testing of fiber-reinforced concrete slabs using a specialized testing device, the so-called Stand. The experimental testing involved a total of three slabs with different fiber dosing.
Čajka Radim, Marcalíková Zuzana
doaj +1 more source
Study and application of the slab camber control model in rough rolling
工程科学学报, 2017 Aimed at the frequently occurred problem of slab camber in rough rolling of hot strip mills, the main factors causing slab camber, including the difference in longitudinal stiffness of the mill on both sides, incoming wedge and running deviation of ...
WANG Hai-yu, YANG Quan, WANG Xiao-chen
doaj +1 more source
Modified Reed Equation of Blast Load on Plate with Stiffener
Civil and Environmental Engineering, 2021 The purpose of this study is to analyze numerically the effect of explosions on orthotropic slabs which have partial fixity placement and stiffeners in the x direction, namely in the short span direction.
Buwono Haryo Koco +2 more
doaj +1 more source
Experimental and analytical assessment of ductility in lightly reinforced concrete members [PDF]
, 2010 This is the post-print version of the final paper published in Engineering Structures. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting,
Cashell, KA +5 more
core +1 more source
Comparative Study Of Conventional Slab, Flat Slab And Grid Slab Using ETABS
IOP Conference Series: Materials Science and Engineering, 2021 Abstract In today’s construction, the traditional slab is mostly supported by a beam, with a small slab thickness and a large beam depth, and the weight is carried from beam to column. The flat slab allows architects to place partition walls wherever they are needed. It is widely used because it reduces weight, speeds up building, and is
Abhijit K Sawwalakhe, Prabodh D Pachpor
openaire +1 more source
Cyclic behavior of GFRP-reinforced concrete one-way slabs with synthetic fibers
, 2023 This paper investigates the cyclic behavior of one-way glass fiber-reinforced polymer (GFRP)-reinforced concrete (GFRP-RC) slabs incorporating synthetic fibers. The study aims at improving the performance of GFRP-RC slabs both at serviceability (SLS) and
Noël, Martin +11 more
core +1 more source
Multi-criteria assessment of reinforced limestone powder concrete slabs and columns [PDF]
, 2023 Given the established incentive to produce more sustainable concrete, the application of alternative and environmentally preferential materials, such as limestone (LS) powder, as partial cement (OPC) replacement, can make a significant global ...
Marinkovic, Snežana +4 more
core +1 more source
A Dislocation Perspective on Strength and Toughness in Ceramics
Advanced Engineering Materials, EarlyView.Dislocations in ceramics enjoy a long but yet under‐appreciated history. The three research waves for dislocations in ceramics highlight the topic evolution over the last 90 years. This review focuses on the impact of dislocation on strength and toughness in ceramics.
Xufei Fang
wiley +1 more source
Subsurface hooks in continuous casting slabs of low-carbon steel
工程科学学报, 2017 Hook characteristics in continuous casting slabs of low-carbon steel under different casting conditions were investigated. According to hook morphology, hooks were classified into different types.
ZHANG Xu-bin +5 more
doaj +1 more source