Results 41 to 50 of about 321,840 (309)
Carbon Capture Science & TechnologySolid desiccant dehumidification system can use low-grade energy for regeneration process and reduce the electrical energy consumption, thus saving energy and reducing carbon emissions.
Xin Xiao +3 more
doaj +1 more source
Energies, 2018 Solar radiation intensity significantly influences the cooling loads of building, and the two are correlated and accorded to a certain extent. This study proposes a double effect LiBr–H2O absorption cooling system based on the parabolic trough collector (
Jiangjiang Wang +4 more
doaj +1 more source
Enhancing Monocrystalline Solar Module Efficiency through Front-Surface Cooling with 96% Alcohol
Applied Sciences, 2023 Electrical energy generation in solar modules is mainly limited by the increase in their temperature, and a heat removal process plays an important role. The main goal of the experiment was to keep the temperature of the cooled module below 47 °C through
Stefan Djordjevic +5 more
doaj +1 more source
Frontiers in MicrobiologySoil copper (Cu) pollution is a serious environmental risk in the Panax notoginseng planting area. However, the effect of Cu on soil microbial metabolism and nutrient cycling in this area remains unknown.
Tong Wang +11 more
doaj +1 more source
Cathodic Cage Plasma Deposition of Nanostructured Cu–Fe–Se Coatings on Poly(methyl Methacrylate)
Advanced Engineering Materials, EarlyView.Nanostructured Cu–Fe–Se coatings are deposited on PMMA by a modified cathodic cage plasma process, enabling low‐temperature deposition on polymer substrates. A transition from discontinuous to compact morphology is observed with temperature, with optimal properties at 200°C, where improved CuFeSe2‐type bonding, lowest sheet resistance, and favorable ...
V. S. S. Sobrinho +8 more
wiley +1 more source
Optimization model of solar cooling system with latent heat storage
Acta Polytechnica CTU Proceedings, 2022 Today, the fastest growing end-use in the buildings sector is cooling demand, notes the International Energy Agency (IEA). In the last few years, the interest in solar cooling systems has been growing globally. Solar cooling systems are the next solution
Lana Migla, Kristina Lebedeva
doaj +1 more source
Solar cooling: a case study [PDF]
, 2011 Throughout the years various methods for heat prevention and indoor temperatures control in the summer have been used. The alternative cooling strategies are based on various passive and low energy cooling technologies for protection of the buildings ...
A. CEFALO +2 more
core
Advanced Functional Materials, EarlyView.Intelligent radiative cooling devices, adaptable to various weather conditions, have the potential for year‐round energy savings. This study introduces a sustainable dual‐mode film made from polycaprolactone nanofibers and upcycled chip bags for effective thermal management.
Qimeng Song +4 more
wiley +1 more source
Next MaterialsBuilding materials with capabilities of thermal and moisture regulations can effectively mitigate the fluctuations of indoor temperature and humidity, improve the living comfort, and reduce the energy consumption of buildings.
Peng Zhang, Xin Xiao, Yunfeng Wang
doaj +1 more source
Performance of a building integrated collector for solar heating and radiant cooling [PDF]
, 2011 Due to their limited temperature range, unglazed solar collectors have long been relegated to providing low cost heating in applications such as swimming pool heating systems.
Anderson, Timothy Nicholas +2 more
core +1 more source