Results 111 to 120 of about 474,226 (299)

Quantifying the impact of surface roughness on contact angle dynamics under varying conditions

Scientific Reports
Despite extensive research in recent years to clarify the role of fluid composition on reservoir wettability, understanding the properties of rock and its solid surface characteristics and their effects on wettability and its alteration remains limited ...
Mehdi Razavifar, Arastoo Abdi, Ehsan Nikooee, Omidreza Aghili, Masoud Riazi   +4 more
doaj   +1 more source

Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding

Advanced Engineering Materials, EarlyView.
This study investigates the tribological response of 60NiTi alloy under dry, water‐lubricated and high‐temperature conditions. The alloy exhibits decreasing wear volume and friction with increasing temperature due to the formation of protective oxide layers. The work clarifies dominant wear mechanisms and demonstrates the suitability of 60NiTi for high‐
Anthony Onyebuchi Okoani, Miguel Angel Selles, Maziar Ramezani   +2 more
wiley   +1 more source

Study of Dissolution Process of Solid Cu in Liquid Al

High Temperature Materials and Processes, 2016
The dissolution process of solid Cu in liquid Al influences the compound quality directly when fabricating the copper cladding aluminum (CCA) composite castings utilizing the casting aluminum method. Dissolution rate of solid Cu is investigated utilizing
Chen Shuying, Wu Yang, Chang Guowei, Zhu Changxu, Li Qingchun   +4 more
doaj   +1 more source

Piezoresistive Monitoring of Carbon Nanomaterial‐Reinforced Epoxy Composites Under Cyclic and Fatigue Loading: A Review

Advanced Engineering Materials, EarlyView.
Carbon nanomaterial‐reinforced epoxy composites exhibit pronounced piezoresistive behavior, enabling intrinsic damage sensing under cyclic and fatigue loading. This review critically compares carbon nanotube and graphene systems, correlating filler content, percolation threshold, and gauge factor with sensing stability and damage evolution.
J. M. Parente, J. Nunes‐Pereira, A. P. Silva, P. N. B. Reis   +3 more
wiley   +1 more source

Handbook of Establishing and Maintaining Oxygen‐Free Atmospheres

Advanced Engineering Materials, EarlyView.
This study presents a practical framework for creating oxygen‐free atmospheres at ambient pressure using silane‐doped inert gases. The results show that ultra‐low oxygen levels and strongly reduced water content can be achieved through controlled silane dosing, drying systems, and sensor monitoring.
Sascha Jan Zimmermann, René Gustus, Lienhard Wegewitz, Wolfgang Maus‐Friedrichs   +3 more
wiley   +1 more source

CALCULATION OF THERMAL STRESS ON SOLID SURFACE IN ELASTOHYDRODYNAMIC LUBRICATION OF LINE CONTACT

Jixie qiangdu, 2020
In line contact thermal elastohydrodynamic lubrication,changes of temperature rise are generated on the two solid surfaces in contact with oil film,and the thermal stresses of the two solid surfaces are bound to be generated.
LU ZunYou, LV YanJun
doaj  

Oxide‐Free Titanium Coatings by Wire Arc Spraying in a Silane‐Doped Inert Atmosphere

Advanced Engineering Materials, EarlyView.
A silane‐doped argon atmosphere enables the production of oxide‐free titanium coatings via twin‐wire arc spraying at ambient pressure. This innovative approach eliminates residual oxygen, creating process conditions that prevent oxidation and nitride formation.
Manuel Rodriguez Diaz, Maik Szafarska, René Gustus, Kai Möhwald, Hans Jürgen Maier   +4 more
wiley   +1 more source

Drying of Heat Sensitive Materials of High Moisture Content in Mechanically Spouted Bed of Inert Particles [PDF]

, 2008
In drying operation the material characteristics such as heat sensitivity, moisture content and particle size are of great importance, which should be taken into account in selection of proper design and conditions for the process.
Gyenis, János, Pallai-Varsányi, E., Tóth, J.   +2 more
core  

Electrical Conductivities of Conductors, Semiconductors, and Their Mixtures at Elevated Temperatures

Advanced Engineering Materials, EarlyView.
This article presents a comprehensive review of temperature‐dependent electrical conductivity data for multiple material classes at elevated temperatures, highlighting a persistent conductivity gap between metals and semiconductors in the range of 102$\left(10\right)^{2}$– 107$\left(10\right)^{7}$ S/m. Metal–ceramic irregular metamaterials are proposed
Valentina Torres Nieto, Marcia A. Cooper
wiley   +1 more source

Four‐Point Bending Tests at High Temperatures on Commercial MgO‐C Refractory Bricks with and Without Recyclate Considering Different Carbon Contents

Advanced Engineering Materials, EarlyView.
Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm, Lukas Knöchel, Thomas Schemmel, Christos G. Aneziris, Anja Weidner, Horst Biermann   +5 more
wiley   +1 more source