Results 91 to 100 of about 12,216,408 (279)
The Influence of TiO2/Si3N4 Nano-Particles on the wear Properties of Aluminium hybrid composites through stir casting process [PDF]
E3S Web of ConferencesThe Wear tests for Al-Zn alloys reinforced with TiO₂ and Si₃N₄ were conducted using the Pin-on-Disc method to estimate the wear rate under different load conditions, sliding distance, and reinforcement percentage.
Prasad T. Satya +5 more
doaj +1 more source
Rapidly Solidified High‐Strength Invar 36 Prepared by Planar‐Flow Melt Spinning
Advanced Engineering Materials, EarlyView.The Invar 36 alloy was rapidly solidified using the planar‐flow melt‐spinning technique. Ribbon samples with thicknesses ranging from 20 to 160 mm were produced. As the grain size of the ribbon decreased to sub‐micron levels, the hardness increased by more than 2 times.
Bekir Akgül, Mehmet Kul
wiley +1 more source
Advanced Engineering Materials, EarlyView.Cu and combined Cu–P microalloying refine the microstructure and enhance the nanoindentation‐derived fracture resistance of CoNiAlSi ferromagnetic shape memory alloys without suppressing the martensitic transformation. Comparative SEM, DSC, and nanoindentation results reveal that the CuP‐containing alloy provides the most balanced response, achieving ...
Mehmet Demir
wiley +1 more source
Counterion Dependent Side‐Chain Relaxation Stiffens a Chemically Doped Thienothiophene Copolymer
Advanced Functional Materials, EarlyView.Oxidation of a thienothiophene copolymer, p(g3TT‐T2), via different doping strategies and dopant molecules resulted in materials with similar oxidation levels and a high electrical conductivity of ≈100 S cm−1. However, mechanical properties varied significantly, with sub‐glass transition temperatures and elastic moduli spanning from –44°C to –3°C and ...
Mariavittoria Craighero +12 more
wiley +1 more source
Wear mechanisms of TiN coated tools during high-speed tapping of GGG50 nodular cast iron
, 2023 Ductile irons are among the most used materials in the automotive industry. One of the critical problems during manufacturing of powertrain components is the fast wear of cutting tools because it can lead to defects in the part.
Veiga, Fernando +3 more
core +1 more source
Advanced Functional Materials, EarlyView.ABSTRACT Chitosan, a polysaccharide upcycled from biowaste, has long promised sustainable, biocompatible, and antimicrobial films and devices, an appeal reinforced by its recent regulatory recognition, with several chitosan‐based antibacterial dressings gaining clearance through the Food and Drug Administration's 510(k) pathway.
Jacopo Nicoletti +16 more
wiley +1 more source
Advanced Functional Materials, EarlyView.P4bm framework in NaNbO3‐Ba(Ti, Hf)O3 ferrodistortive relaxor entails short‐range and highly‐polar ferrodistortive orders. The abundant highly‐polar orders facilitate to increase entropy change, and robust octahedral oxygen tilt enables to impede thermal perturbations.
Feng Li +11 more
wiley +1 more source
Wear modelling of diamond-like carbon coatings against steel in deionised water
, 2014 Diamond-Like Carbon (DLC) coatings are thin protective surface coatings used to reduce friction and minimise wear in a wide range of applications. The focus of this work is the use of DLC coatings within Rolls-Royce’s pressurised water reactors. A strong
Sutton, Daniel Christopher
core +1 more source
Advanced Functional Materials, EarlyView.ABSTRACT Electronic waste has emerged as a major environmental challenge, driven by the massive consumption and a limited lifetime of modern electronic devices, stimulating the development of sustainable electronics. Here, an all‐biomaterial gelatin‐choline‐citric acid ([Ch][CA]) ionogel is developed as an active binder to realize self‐sintered ...
Lin Guo +10 more
wiley +1 more source
HeliyonCasing wear is a persistent issue in oil and gas drilling facilities that call for innovative more wear-resistant materials to mitigate casing failures.
Y. Fouad +8 more
doaj +1 more source