Results 31 to 40 of about 413 (231)
Advanced Engineering Materials, EarlyView.Powder metal processing provides scalable advantages in nanoporous (np) metal development. Mechanical alloying is used to produce unique precursors for hybrid nanopore formation by oxide reduction and dealloying. As demonstrated in np Ag, this approach improves process efficiency while promoting smaller ligaments and larger pores, both of which are ...
Mark A. Atwater, Oliver A. Fowler
wiley +1 more source
Advanced Engineering Materials, EarlyView.Trace additions of Sn and Sr combined with a two‐step aging treatment are shown to enhance the microstructure and performance of Al–Zr–Sc conductor alloys. Strength and electrical conductivity increase concurrently through accelerated precipitation of fine Al3(Sc, Zr) precipitates and improved dislocation resistance, offering a cost‐effective pathway ...
Quan Shao +3 more
wiley +1 more source
Jixie chuandong, 2021 When the polar coordinate method is used to measure the involute tooth profile deviation of cylindrical gear，the contact point between the spherical probe and the tooth profile changes constantly on the spherical surface of the probe. The roundness error
Yubin Teng, Tao Sun
doaj
Powder Optimization Strategies for Binder Jetting Printing of BaTiO3 and Ba0,6Sr0,4TiO3 Ceramics
Advanced Engineering Materials, EarlyView.Powder optimization is investigated to enable binder jetting of BaTiO3 and Ba0.6Sr0.4TiO3 ferroelectric ceramics. The antagonistic relationship between flowability and binder compatibility is addressed through binder impregnation of granulated powders and fumed silica addition to fine powders.
Fanny Pruvost +4 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source
Research of Design Method of Bevel Gear Tooth Profile based on Conical Involute
Jixie chuandong, 2016 In order to making the tooth profile of bevel gear be close to its theoretical spherical involute,a design method of the tooth profile of bevel gear using conical involute is proposed,that is forming the involute tooth profile of bevel gears on the back ...
Hou Hongling, Xing Si, Shu Linsen
doaj
Advanced Engineering Materials, EarlyView.Additive manufacturing provides precise control over the placement of continuous fibres within polymer matrices, enabling customised mechanical performance in composite components. This article explores processing strategies, mechanical testing, and modelling approaches for additive manufactured continuous fibre‐reinforced composites.
Cherian Thomas, Amir Hosein Sakhaei
wiley +1 more source
A Dislocation Perspective on Strength and Toughness in Ceramics
Advanced Engineering Materials, EarlyView.Dislocations in ceramics enjoy a long but yet under‐appreciated history. The three research waves for dislocations in ceramics highlight the topic evolution over the last 90 years. This review focuses on the impact of dislocation on strength and toughness in ceramics.
Xufei Fang
wiley +1 more source
On the natural lift curves for the Involute spherical indicatrices in Minkowski 3-space
, 2014 13 pages, 7 ...
Bilici, M., Ali, A. T.
openaire +2 more sources
On the natural lift curves for the involute spherical indicatrices in Minkowski 3-space
Malaya Journal of Matematik, 2017 This study presents some new conditions of being integral curve for the geodesic spray of the natural lift curves of the spherical indicatrices of the involutes of a given spacelike curve with a timelike binormal in Minkowski 3-space. Furthermore, depending on these conditions some interesting results about the spacelike evolute curve were obtained ...
null M. Bilici, null T.A. Ahmad
openaire +1 more source