Results 31 to 40 of about 31,973 (257)
Near‐Field Electrospinning Micro‐Printhead Achieves Precise Control of Nanofiber Deposition
Advanced Engineering Materials, EarlyView.A micro‐printhead for near‐field electrospinning enables reproducible deposition of polymer nanofibers with diameters below 50 nm. Systematic parameter studies uncover the mechanisms linking operating conditions to fiber morphology, paving the way for precise and low‐cost nanoscale 3D manufacturing.As a high‐resolution, cost‐effective, and rapid ...
Han Xu, Dario Mager, Jan G. Korvink
wiley +1 more source
Advanced Engineering Materials, EarlyView.This article presents the design, modeling, and characterization of air‐pressure–actuated programmable vibroacoustic metamaterials (PVAMM). The study focuses on leveraging air pressure to dynamically tune resonance frequencies for effective noise attenuation.
William Kaal +2 more
wiley +1 more source
, 2022 The static Euler-Bernoulli beam is a simplified model from linear elasticity theory for small deformations, with which the stresses and deflections of slender beams can be determined very well. The simplicity of Euler-Bernoulli beam theory makes it still
Eberle, Robert +1 more
core +1 more source
Evaluating Energy Absorption Performance of Filled Lattice Structures
Advanced Engineering Materials, EarlyView.Maximum stress must be considered to robustly evaluate energy absorber designs. This approach was applied to compare all types of absorbers in a single Ashby diagram and determine the utility of filling lattice voids with a second material. High‐performance fillers can improve the performance of lattices that are limited by buckling or catastrophic ...
Christian Bonney +2 more
wiley +1 more source
Performance Analysis of Abradable Coating Systems for Aircraft Gas Turbines
Advanced Engineering Materials, EarlyView.Three CoNiCrAlY/YSZ/MgAl2O4 abradable liner configurations on a nickel‐superalloy are evaluated by thermal‐gradient cycling and incursion tests. Laser ablation of the bondcoat and/or Y2O3‐stabilized ZrO2 (YSZ) intermediate layer increases mechanical interlocking and bonding for thick topcoats.
Hanna Heyl +4 more
wiley +1 more source
, 2011 In this study, acoustic emission (AE) monitoring with a Fuzzy C-Means (FCM) clustering is developed to detect the delamination process during quasi-static 3-point bending test on glass/epoxy composite materials.
Mehdi Ahmadi Najaf Abadi +3 more
core +1 more source
Advanced Engineering Materials, EarlyView.Selenium was incorporated into a sol–gel‐derived bioactive glass to enable sustained therapeutic ion release. The selenium‐containing glass preserved bioactivity while selectively inducing cytotoxicity in osteosarcoma cells and maintaining osteoblastic viability.
Breno Rocha Barrioni +7 more
wiley +1 more source
BioResourcesWood plays an essential role in civil construction due to its structural and sustainable properties. The longitudinal (E) and the transverse (G) modulus of elasticity are crucial for designing beams under bending, where combined deformations occur due to normal and shear stresses.
Fabricio da Silva Aguiar +5 more
openaire +2 more sources
Materials Transactions, JIM, 1995 In order to investigate the relationship between the impact and static bending behaviors at low temperatures for molybdenum having different grain structures and different grain boundary strengths, the impact and static bend tests were performed for miniaturized specimens of five kinds of molybdenum.
Hiraoka, Yutaka +3 more
openaire +2 more sources
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source