Results 231 to 240 of about 2,859 (264)
Some of the next articles are maybe not open access.
Quasi-Static Flexural and Indentation Behaviour of Polymer-Metal Laminate
Advanced Materials Research, 2014Metal-polymer laminates were subjected to quasi-static flexural and indentation loading. The laminates were made of two aluminium skins heat-bonded (laminated) to a core made of polyethylene plastic material. The samples were trimmed into standard-sized beams and panels which were then tested in flexural and indentation using the Instron universal ...
Ayob, Amran +3 more
openaire +2 more sources
Effect of Axial Impact on the Static Flexure of Graphite/Epoxy Beams
Journal of Reinforced Plastics and Composites, 1989Graphite-epoxy beams were subjected to an eccentric axial impact load in a drop tower test fixture in order to study their large displacement flexural behavior. The time history of the transient axial load exhibited a large magnitude occurring just after impact, which was many times greater than the static failure load.
M.D. Sensmeier +2 more
openaire +1 more source
Compliance modeling and analysis of statically indeterminate symmetric flexure structures
Precision Engineering, 2013Abstract The linear and angular compliance models for a class of statically indeterminate symmetric (SIS) flexure structures are established in this paper. Compared with a single flexure hinge, the SIS flexure structure is free of parasitic motions when a force or moment is applied.
Yanding Qin +3 more
openaire +1 more source
Static and dynamic flexural strength of 99.5% alumina: Relation to porosity
Mechanics of Materials, 2012Abstract Advanced ceramic materials are widely implemented in a variety of cutting edge engineering applications. Their dynamic flexural strength is an important property under impact loading conditions. Therefore, this work reports a systematic comparison of static and dynamic flexural strength results for 99.5% commercial alumina, obtained using a ...
A. Belenky, D. Rittel
openaire +1 more source
Quasi-static and Modal Analysis of Bridge-Type Compliant Mechanism with Flexure Hinges
2013 Second International Conference on Robot, Vision and Signal Processing, 2013Displacement amplification ratio and input stiffness are significant design characteristics for an ultra-precision positioning flexure-based compliant mechanism. Early and accurate performance prediction models can significantly improve the reliability and availability of product in the field of ultra-precision positioning, but Existing theoretic ...
Yuan Ni +5 more
openaire +1 more source
Flexural Static Energy of Steel Fiber Rubberized Concrete Beams with Layered Distribution
2018 11th International Conference on Developments in eSystems Engineering (DeSE), 2018In this study, an investigation on the effect of crumb rubber aggregate on flexural performance of plain and steel fiber concrete was presented. Two replacement volumes of sand by crumb rubber were selected as 5% and 15%. The content of steel fiber in fibrous concrete was 0.5% (39 kg/m3).
Ahmed Tareq Noaman +2 more
openaire +1 more source
Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer
Advanced Materials Research, 2013In this paper, glass fiber reinforce polymer subject to quasi-static three point bending loading and tensile loading was studied experimentally. Glass fiber reinforced made of chopped strand mat (CSM) were used in this study. Several samples were prepared and tested by using Instron universal testing machine at different strain rate including 1mm/min ...
Yahya, Mohd. Yazid +3 more
openaire +2 more sources
Journal of Applied Mechanics, 1956
Abstract Herein is presented a means for calculating the static deflections, slopes, moments, and shears of a nonuniform beam on two supports for any end conditions and on three simple supports when subjected to concentrated loads and/or concentrated moments.
openaire +2 more sources
Abstract Herein is presented a means for calculating the static deflections, slopes, moments, and shears of a nonuniform beam on two supports for any end conditions and on three simple supports when subjected to concentrated loads and/or concentrated moments.
openaire +2 more sources
STATIC FLEXURE OF CROSS-PLY LAMINATED CANTILEVER BEAMS
Composites: Mechanics, Computations, Applications: An International Journal, 2014Yuwaraj M. Ghugal, Sangita B. Shinde
openaire +1 more source