Results 31 to 40 of about 22,963 (264)
Expert system for analysis of casting defects - ESVOD [PDF]
, 2015 The powerful tool for defect analysis is an expert system. It is a computer programme based on the knowledge of experts for solving the quality of castings. We present the expert system developed in the VSB-Technical University of Ostrava called 'ESWOD'.
Elbel, Tomáš +2 more
core +1 more source
Advanced Engineering Materials, EarlyView.Micro‐Raman spectroscopy is applied to characterize corrosion products in a recycled‐based MgO–316L steel composite anode after molten salt electrolysis. A depth‐dependent Fe–O/Fe–Al–O layer sequence of magnetite, hercynite, and an Al‐doped magnetite transition zone is identified.
Felix Drechsler +9 more
wiley +1 more source
MetalMatThe scanning electron microscope equipped with an energy dispersive spectroscopy (SEM/EDS) is considered as a state‐of‐the‐art characterization tool to determine the morphological features and the chemical composition of non‐metallic inclusions in steel.
Shashank Ramesh Babu +1 more
doaj +1 more source
Modeling and Optimization of Steel Machinability with Genetic Programming: Industrial Study
Metals, 2021 In this paper, machinability influences from the start to end of final product production in a steel plant were analyzed, including chemical composition, deoxidizing agents and casting parameters, which drastically influence the macrostructure and ...
Miha Kovačič +3 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.A carbon‐free, as‐sintered MgO–steel cermet anode, fabricated via cold isostatic pressing using MgO–C refractory recyclate, was evaluated under laboratory‐scale K‐cryolite electrolysis at 800°C. Operation at this reduced temperature, combined with the electrolyte's limited electrical conductivity, led to an increase in cell voltage.
Farhan Hossain +7 more
wiley +1 more source
Interaction of Ladle Slag With Varying SiO2 Content and Recyclate‐Based MgO–C Refractories
Advanced Engineering Materials, EarlyView.Ladle slags (CaO/Al2O3 = 1) with 1–20 wt% SiO2 were investigated in contact with industrial MgO–C refractories fabricated from fresh magnesia and 50 wt% recyclate. The sessile drop method at 1600°C reveals intensive gas formation, delayed slag infiltration in recyclate‐based samples, and, under high‐SiO2 slag, formation of a dense MgAl2O4‐rich ...
Anton Yehorov +6 more
wiley +1 more source
Differentiation and Dynamics of Competitiveness Impacts from the EU ETS [PDF]
, 2007 We summarise the main factors that differentiate impacts of the EU ETS on profitability and market share. By examining and sampling a range of sectors, we present some simple metrics and indicators to help judge the nature of potential impacts.
Ceppi, Pablo +5 more
core +2 more sources
Advanced Engineering Materials, EarlyView.Collagen hydrolysate is evaluated as a sustainable binder for MgO‐C refractories. Its thermally induced cross‐linking and gas release lead to expansion and cracking in large bricks, but tailored batches with lignin, recyclates, or fine graphite improve the gas release while thermal treatment and stability.
Till M. J. Stadtmüller +8 more
wiley +1 more source
Journal of Materials Research and TechnologyNi-based superalloys are essential for high-temperature applications in aerospace, yet their mechanical properties are intricately linked to the size distribution of γ′ precipitations.
Qian Wang +11 more
doaj +1 more source
Research and development of the solidification of slab ingots from special tool steels [PDF]
, 2017 The paper describes the research and development of casting and solidification of slab ingots from special tool steels by means of numerical modelling using the finite element method. The pre-processing, processing and post-processing phases of numerical
Gryc, Karel +7 more
core +1 more source