Results 271 to 280 of about 18,273 (288)
Some of the next articles are maybe not open access.
Effect of stress-relief annealing on the inverse swift effect in steel and iron
Scripta Metallurgica et Materialia, 1995The Swift effect (1) refers to the length changes that take place in metal bars and hollow tubes during torsional deformation to large strains. The inverse Swift effect reverse to the twisting that accompanies axial elongation when pretwisted samples are loaded in free extension. In this work, free end tensile tests were performed on plain carbon steel
A. Rohatgi, J.J. Jonas, S. Shrivastava
openaire +1 more source
Journal of Magnetism and Magnetic Materials, 2006
Abstract Fully processed non-oriented silicon steel samples 0.50 mm thick were sheared and submitted to stress relief annealing under different conditions of temperature and atmosphere to investigate the effect of this treatment on the recovery of magnetic properties.
Sebastião C. Paolinelli +1 more
openaire +1 more source
Abstract Fully processed non-oriented silicon steel samples 0.50 mm thick were sheared and submitted to stress relief annealing under different conditions of temperature and atmosphere to investigate the effect of this treatment on the recovery of magnetic properties.
Sebastião C. Paolinelli +1 more
openaire +1 more source
CORROSION 1970, 1970
Season-cracking in brass is classically stated to be the first practical occurrence of stress corrosion cracking.1 Further-more, the degree of stress corrosion susceptibility of copper-base alloys varies widely from, for example, the highly susceptible 70-30 brass to the very resistant copper-nickels.
J.M. Popplewell +2 more
openaire +1 more source
Season-cracking in brass is classically stated to be the first practical occurrence of stress corrosion cracking.1 Further-more, the degree of stress corrosion susceptibility of copper-base alloys varies widely from, for example, the highly susceptible 70-30 brass to the very resistant copper-nickels.
J.M. Popplewell +2 more
openaire +1 more source
Materials Science Forum, 2016
The effects of stress-relief annealing on the distribution of residual stress and on the microstructure of TA15 (Ti-6.5Al-2Zr-1Mo-1V) alloy joints by electron beam welding (EBW) were investigated. The results indicated that the microstructure of welded joint presented a transitional change, i.e.
Teng Ma +4 more
openaire +1 more source
The effects of stress-relief annealing on the distribution of residual stress and on the microstructure of TA15 (Ti-6.5Al-2Zr-1Mo-1V) alloy joints by electron beam welding (EBW) were investigated. The results indicated that the microstructure of welded joint presented a transitional change, i.e.
Teng Ma +4 more
openaire +1 more source
Effect of stress-relief annealing on rolled texture of nickel-based alloys
Journal of Alloys and Compounds, 2022Yaotang Ji +8 more
openaire +1 more source
IEEE Transactions on Magnetics, 1978
A series of controlled experiments was performed to investigate the effect of various stress-relief annealing treatments on magnetic permeability and tendency to aging of grain-oriented electrical steel strips M5, 0.30 mm. The best quality is produced by stress-relief annealing in a continuous roller type furnace.
openaire +3 more sources
A series of controlled experiments was performed to investigate the effect of various stress-relief annealing treatments on magnetic permeability and tendency to aging of grain-oriented electrical steel strips M5, 0.30 mm. The best quality is produced by stress-relief annealing in a continuous roller type furnace.
openaire +3 more sources
Effect of Stress-Relief Annealing on the Rolled Texture of Nickel-Based Alloys
SSRN Electronic Journal, 2021Yaotang Ji +7 more
openaire +1 more source
Journal of Pressure Vessel Technology, 2002
Stress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual stresses of a very thick welded joint by SR treatment.
openaire +1 more source
Stress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual stresses of a very thick welded joint by SR treatment.
openaire +1 more source
Journal of Applied Physics, 1984
The effect of the heating rate used during stress relief annealing of amorphous alloy toroids on the final soft magnetic properties has been investigated by comparing three different annealing techniques. Batch furnace annealing of a completely formed toroid provides the slowest heating rate and the poorest properties.
openaire +1 more source
The effect of the heating rate used during stress relief annealing of amorphous alloy toroids on the final soft magnetic properties has been investigated by comparing three different annealing techniques. Batch furnace annealing of a completely formed toroid provides the slowest heating rate and the poorest properties.
openaire +1 more source
Prediction of Leveling Warped Metal Plate by Stress Relief Annealing Process
International Rolling Conference (IRC 2025) Conference ProceedingsNobuhito Mifune +2 more
openaire +1 more source