Results 231 to 240 of about 2,503 (247)

Calculation of thermoplastic stresses of a reactor pressure vessel with cladding from stress-relief annealing up to a thermal shock

Nuclear Engineering and Design, 1986
Abstract The distribution of stresses in the cylindrical section of a reactor pressure vessel is evaluated for transient temperature and pressure loads. The calculation takes particularly into account the thermoplastic stresses of the cladding and the transition zone to the base material. The considered load history comprises stress-relief annealing,
openaire   +1 more source

Effect of various stress-relief annealing treatments on permeability and aging of grain-oriented electrical steel strips

IEEE Transactions on Magnetics, 1978
A series of controlled experiments was performed to investigate the effect of various stress-relief annealing treatments on magnetic permeability and tendency to aging of grain-oriented electrical steel strips M5, 0.30 mm. The best quality is produced by stress-relief annealing in a continuous roller type furnace.
openaire   +3 more sources

Mechanical and Structural Responses of Low Carbon Steel to Cold Rolling and Stress Relief Anneal Treatments

ARID ZONE JOURNAL OF ENGINEERING, TECHNOLOGY AND ENVIRONMENT, 2020
This study investigated the effect of deformation by cold rolling and stress relief anneal on the mechanical and structural properties of low carbon steel. The as-received steel samples were cold rolled at 20% – 40% degrees of deformation using Buhler rolling machine in Metallurgical and Materials engineering department University of Lagos, Nigeria ...
Bodude, M. A., Ayoola, W. A., Oyetunji, A.   +2 more
openaire   +2 more sources

Relief of residual grinding stresses by annealing

Wear, 1958
openaire   +1 more source

Multipass Welding Stresses in Very Thick Plates and Their Reduction from Stress Relief Annealing

Transactions of JWRI, 1976
Ueda, Yukio, Takahashi, Eiji, Fukuda, Keiji, Sakamoto, Koichi, Nakacho, Keiji   +4 more
openaire   +1 more source

Examination of Effect of Stress-relief Annealing of Motor Core Materials using Induced Magnetic Field

Nihon AEM Gakkaishi, 2021
Yuichiro Kai
exaly  

Prediction of Leveling Warped Metal Plate by Stress Relief Annealing Process

International Rolling Conference (IRC 2025) Conference Proceedings
Nobuhito Mifune, Kazuya Kimijima, Hiroaki Hosoi   +2 more
openaire   +1 more source

An Efficient Method for Estimation of Reduction of Welding Residual Stresses from Stress-Relief Annealing (Report IV) : Applicability of the Method for Stress-Relief Annealing of Thick Welded Joints(Mechanics, Strength & Structure Design)

Transactions of JWRI, 1996
Nakacho, Keiji, Ueda, Yukio
openaire   +1 more source

REHEAT CRACKING DURING STRESS RELIEF ANNEALING — A NUMERICAL APPROACH

1984
openaire   +1 more source

Influence of Stress-Relief Annealing on Magnetic Properties of Motor Cores Using Induced Current Heating Method

Nihon AEM Gakkaishi, 2015
Yuichiro Kai
exaly