Results 11 to 20 of about 147 (130)

Influence of different skew angles of the submerged vane on pressure flushing performance [PDF]

open access: yesScientific Reports, 2023
Siltation significantly threatens a reservoir’s original storage capacity and lifespan. Pressure flushing is an effective measure against siltation through the partial drawdown of the reservoir water level with limited flushed cone volumes in front of ...
Sepideh Beiramipour   +4 more
doaj   +2 more sources

Combination of Riprap and Submerged Vane as an Abutment Scour Countermeasure

open access: yesFluids, 2023
Scour is one of the main causes of hydraulic structural failures. The present experimental study examines the use of riprap, submerged vanes, and a combination of these for scour reduction around vertical walls and spill-through abutments under clear ...
Abazar Fathi   +6 more
doaj   +1 more source

Experimental Comparison of Sacrificial Piles and Submerged Vanes as Scour Countermeasures around Bridge Pier [PDF]

open access: yesJournal of Rehabilitation in Civil Engineering, 2019
An experimental study has been conducted on the effectiveness of two types of flow-altering countermeasures placed around a cylindrical pier under clear water condition, which consists of sacrificial piles and submerged vanes.
Nazanin Shahkarami
doaj   +1 more source

The Effects of submerged vanes inclination angle on sediment transport into sub-channel

open access: yesWasit Journal of Engineering Sciences, 2023
The sub-channels that branch from the larger rivers may be manmade or natural. From the major channels, these sub-channels transfer sediments and water. The deposition of sediments at the entrance, sub-channel is a significant research challenge because
mnaf adel, Ali N. Hilo
doaj   +1 more source

Study of Streamlines under the Influence of Displacement of Submerged Vanes in Channel Width, and at the Upstream Area of a Cylindrical Bridge Pier in a 180 Degree Sharp Bend [PDF]

open access: yesJournal of Hydraulic Structures, 2018
In this paper, submerged vanes were placed at the upstream area of a bridge pier located at the 90 degree angle. Then, using the laboratory equipment, a study of flow pattern was conducted throughout the bend, specifically around the pier and submerged ...
Chonoor Abdi Chooplou   +2 more
doaj   +1 more source

Mapping scour depth around group bridge pier under controlled conditions [PDF]

open access: yesJournal of Hydraulic Structures, 2023
As a destructive process, scouring exposes bridge foundations to failure and disastrous consequences. Control structures of various arrangements are capable to change and manage the adverse effects.
Mahdi Majedi-Asl   +2 more
doaj   +1 more source

Experimental Analysis of the Effect of Geometric Shape of Submerged Vanes on Sedimentation Flows at Lateral Intake Entrance in River Bends [PDF]

open access: yesعلوم و مهندسی آبیاری, 2019
The separation zone in the entrance of intake channel has no effect on flow discharge but it reduces the effective cross-sectional area of the intake, as well as the bed load, which enters the intake due to low velocity flow deposits in this area ...
HOSSEIN Habibi   +4 more
doaj   +1 more source

Experimental Investigation of Flat, Curved and Angled Submerged Vane’s Placement Effect on Bridge Pier Scouring [PDF]

open access: yesعلوم و مهندسی آبیاری, 1970
One of the methods for a local scour countermeasure at bridge piers is the use of submerged vanes. Vanes change the regime of bed load movement that led to control place of deposition and erosion.
Leyla Parchami   +2 more
doaj   +1 more source

Experimental Investigation of Submerged Vanes’ Shape effect on river-bend stability [PDF]

open access: yesJournal of Hydraulic Structures, 2013
In river meandering, when flow passes through a bend, reduction of flow velocity and rising hydrostatic pressure cause super elevation phenomena at outer side and reduction of water surface at inner-side of the bend.
Gholam Abbass Barani   +1 more
doaj   +1 more source

Numerical Simulation of Flow Pattern around the Bridge Pier with Submerged Vanes [PDF]

open access: yesJournal of Hydraulic Structures, 2016
Bridges are very important for establishing communication paths. For this reason, it is important to control scour around bridge piers. Several methods have been proposed for scour control. One of the most useful methods is the use of submerged vanes. In
Sajedeh Azizi   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy