Results 31 to 40 of about 17,583 (228)
Roll–Vertical Coupled Roll State Estimation and Coordinated Control for Active Suspension Vehicles
Roll motion induced by steering maneuvers and vertical vibration excited by road unevenness are strongly coupled in active suspension vehicles. Neglecting this coupling may deteriorate the performance of coordinated chassis control and compromise both ...
Tie Xu +6 more
doaj +1 more source
The effect of large-strain cold-to-warm deformation on the microstructures and mechanical properties of various steels and alloys is critically reviewed.
Anastasiia Dolzhenko +3 more
doaj +1 more source
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati +11 more
wiley +1 more source
To solve the conflict between trajectory tracking and stability control for distributed drive electric vehicles under complex driving conditions, an integrated longitudinal and lateral coordinated control strategy based on a hierarchical architecture is ...
Danhua Chen +6 more
doaj +1 more source
In situ synchrotron high‐energy X‐ray diffraction reveals the real‐time high‐temperature phase evolution of a ternary V‐9Si‐6.5B alloy. The study uncovers a kinetically delayed V5SiB2 → V8SiB4 transformation governed by massive structural and chemical barriers.
Zahra Sabeti +4 more
wiley +1 more source
Research on Optimal Design of Multi-DoF Forming Process for High-Ribbed Ring-Groove Components
Aiming at the technical challenges in the Multi-DoF forming of 20CrMnTi high-ribbed ring-groove components, including complex metal flow behavior that easily causes under-filling defects and complicated die stress states prone to die failure, this paper ...
Boyu Zheng +3 more
doaj +1 more source
In this work, a finite-element model was elaborated to simulate the thermomechanical behavior of 6061 aluminum alloy during friction-stir welding (FSW). It was shown that FSW-induced deformation is a two-stage process.
Vasiliy Mishin +7 more
doaj +1 more source
Postbuild annealing systematically modifies the phase fractions and morphology of EB‐PBF processed Mo–9Si–8B. Quantitative microstructure–property correlations reveal how controlled phase evolution enhances high‐temperature compressive strength and creep resistance.
Christopher Schmidt +5 more
wiley +1 more source
A systematic study of the microstructural response of conventionally cast IN 738 and single crystal CMSX 486 superalloys during linear friction welding was performed.
P. Wanjara +9 more
core +1 more source
The martensitic 100Cr6 bearing steel suffers from severe strength-toughness trade-off, restricting its service reliability. Herein, ultrafine martensite/bainite heterostructure was fabricated via rolling-induced grain refinement and austempering-enabled ...
Yuchen Du +5 more
doaj +1 more source

