Results 21 to 30 of about 3,442,663 (283)
A stripped no-core optical fiber with a 125 µm diameter was transformed into a symmetric and unbroken optical fiber that tapers slightly to a 45-µm-diameter waist. The laser light can be easily launched into the no-core optical fiber.
Yen-Si Huang, Fang-Wen Sheu
doaj +1 more source
Optical Gas Sensor Fabrication Based on Porphyrin-Anchored Electrostatic Self-Assembly onto Tapered Optical Fibers [PDF]
Tapered optical fibers with nano-assembled coatings of thicknesses of order tens of nanometres were used for the detection of ammonia gas. The film coating was composed of alternate layers of tetrakis-(4-sulfophenyl) porphine (TSPP) and poly(allylamine ...
Lee, Seung-Woo +5 more
core +1 more source
Sub-Nanometer Acoustic Vibration Sensing Using a Tapered-Tip Optical Fiber Microcantilever
We demonstrate a highly sensitive acoustic vibration sensor based on a tapered-tip optical fiber acting as a microcantilever. The tapered-tip fiber has a unique output profile that exhibits a circular fringe pattern, whose distribution is highly ...
Chunyu Lu +4 more
doaj +1 more source
Observation of the acceleration of light in a tapered optical fiber
One of the most fascinating aspects of quantum fields in curved spacetime is the Unruh effect. The direct experimental detection of Unruh temperature has remained an elusive challenge up to now. Gradient optical waveguides manipulating the dispersion of photons are assumed to realize the great acceleration of effective particles, leading to a high ...
Ge, Hui +3 more
openaire +3 more sources
Multiplexing a serial array of tapered optical fibre sensors using coherent optical frequency domain reflectometry [PDF]
The use of high spatial resolution optical frequency domain reflectometry (OFDR) to facilitate the multiplexing of a serial array of tapered optical fibre sensors is presented.
Tatam, Ralph P. +3 more
core +1 more source
Monitoring techniques for the manufacture of tapered optical fibers [PDF]
The use of a range of optical techniques to monitor the process of fabricating optical fiber tapers is investigated. Thermal imaging was used to optimize the alignment of the optical system; the transmission spectrum of the fiber was monitored to confirm that the tapers had the required optical properties and the strain induced in the fiber during ...
Mullaney, Kevin +4 more
openaire +4 more sources
Optical Field Transmission Analysis of an All-Fiber Signal Combiner With a Dumbbell Shape
In this paper, the optical field transmission characteristics of an all-fiber signal combiner with a dumbbell shape and its application in laser beam combining are analyzed theoretically. Based on the three-layer waveguide model, the mode characteristics
Xuanfeng Zhou
doaj +1 more source
Optical transmittance degradation in tapered fibers
We investigated the cause of optical transmittance degradation in tapered fibers. Degradation commences immediately after fabrication and it eventually reduces the transmittance to almost zero. It is a major problem that limits applications of tapered fibers. We systematically investigated the effect of the dust-particle density and the humidity on the
Fujiwara, Masazumi +2 more
openaire +4 more sources
High-Q bismuth silicate nonlinear glass microsphere resonators [PDF]
The fabrication and characterization of a bismuth-silicate glass microsphere resonator has been demonstrated. At wavelengths near 1550 nm, high-modes can be efficiently excited in a 179 µm diameter bismuth-silicate glass microsphere via evanescent ...
Ding, M. +18 more
core +1 more source
We build a 3D printing spiral conical tapered gold tip directly on the end face of an optical fiber as an efficient fluorescence enhancement device via the two-photon polymerization direct laser writing technology and magnetron sputtering technique.
Li Long +3 more
doaj +1 more source

