Results 1 to 10 of about 77,494 (303)
Investigation of Carbon Fiber on the Tensile Property of FDM-Produced PLA Specimen [PDF]
Polymers, 2022 Herein, the effect of carbon fibers (CFs) on the tensile property of a polylactic acid (PLA) specimen prepared by utilizing the fused deposition modeling (FDM) method, is investigated.
Mengyu Cao, Chaoyu Li, Cao Mengyu
exaly +3 more sources
Study of Shape Memory and Tensile Property of 3D Printed Sinusoidal Sample/Nylon Composite Focused on Various Thicknesses and Shape Memory Cycles [PDF]
Polymers, 2020 This study evaluated the shape memory and tensile property of 3D-printed sinusoidal sample/nylon composite for various thickness and cycles. Sinusoidal pattern of five thicknesses: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm, and 1.0 mm were 3D-printed on nylon ...
Shahbaj Kabir, Sunhee Lee, Lee Sunhee
exaly +3 more sources
Measurement Uncertainty and Representation of Tensile Mechanical Properties in Metals
Metals, 2021 The International Organization for Standardization Technical Committee for Metallic Materials—Tensile Testing stated in 2011 that temperature and strain rate variations would induce a change in the results of tensile tests, termed as the measurement ...
Tingdong Xu, Kai Wang, Shenhua Song
doaj +2 more sources
Tensile property of thin microcellular PC sheets prepared by compression molding
eXPRESS Polymer Letters, 2007 Thin microcellular polycarbonate (PC) sheets have been prepared by compression molding. Tensile tests were performed on microcellular PC sheets prepared under different conditions, and results show that foaming time plays the main role on the tensile ...
doaj +2 more sources
High Temperature Materials and Processes, 2017 Defect-free joint of Ti–6Al–4V alloy was successfully friction stir welded below β-transus temperature and then tensile tests were performed. Microstructure, macrostructure, tensile properties and fracture position are mainly discussed in order to ...
Ji Shude +5 more
doaj +2 more sources
Tensile Fracture Property of Concrete Affected by Interfacial Transition Zone
International Journal of Concrete Structures and Materials, 2023 As a weak link between aggregate and mortar in concrete, interfacial transition zone (ITZ) usually plays a key role in concrete fracture. To investigate the tensile fracture property of concrete affected by the mechanical properties of ITZ numerically ...
Heli Ji, Xinhua Yang, Zuyun Luo, Fan Bai
doaj +2 more sources
Journal of Rock Mechanics and Geotechnical Engineering, 2023 In nature, there are widely distributed bi-modulus materials with different deformation characteristics under compressive and tensile stress states, such as concrete, rock and ceramics. Due to the lack of constitutive model that could reasonably consider
Tianmin Wang, Jianhong Ye
doaj +2 more sources
Experimental Analysis of Tensile Mechanical Properties of Sprayed FRP [PDF]
Advances in Materials Science and Engineering, 2016 To study the tensile mechanical properties of sprayed FRP, 13 groups of specimens were tested through uniaxial tensile experiments, being analyzed about stress-strain curve, tensile strength, elastic modulus, breaking elongation, and other mechanical ...
Zhao Yang, Kun Wu
doaj +2 more sources
Influence of Fiber Type and Dosage on Tensile Property of Asphalt Mixture Using Direct Tensile Test. [PDF]
Materials (Basel), 2023 In engineering practice, fiber addition is a frequently used method to improve the tensile property of asphalt mixture. However, the optimum fiber type and dosage have not been determined by direct tensile tests.
Yang S, Zhou Z, Li K.
europepmc +2 more sources
The Effect on Tensile Property of Surface Treatment of MWNTs on MWNTs/PI Films
Journal of Harbin University of Science and Technology, 2017 We discussed the effects of MWNTs surface treatments on MWNTs/PI hybrid films in tensile strength. Used by ultrasonic，mixed acid and Fenton three methods to treat MWNTs，then through in-situ polymerization and heat imidization to prepare MWNTs/PI hybrid ...
ZHANG Ming-yan +3 more
doaj +2 more sources