Results 11 to 20 of about 39,741 (305)
Flexural behaviour of RC one-way slabs reinforced using PAN based carbon textile grid
Frontiers in Materials, 2023 Textile reinforced mortar (TRM) is mainly used for strengthening of existing structural members whereas, on the other hand Textile reinforced concrete (TRC) is a technology implied in construction of new members for enhancing the structural behaviour ...
Suhad M. Abd +8 more
doaj +1 more source
Case Studies in Construction Materials, 2022 The application of textile reinforcement to the tension zone of the reinforced concrete slabs as a means to enhance flexural capacity has been investigated by researchers in the past.
Amer M. Ibrahim +5 more
doaj +1 more source
Applications of polymer optical fibre grating sensors to condition monitoring of textiles [PDF]
, 2009 Fibre Bragg gratings (FBGs) in polymer optical fibres (POFs) have been used to measure the strain in a woven textile. FBGs in both POFs and silica optical fibres were attached to a woven textile specimen, and their performance characterised.
Chambers, A. R. +8 more
core +3 more sources
Effect of Combining Fiber and Textile Reinforcement on the Flexural Behavior of UHPC Plates
Advances in Materials Science and Engineering, 2020 A series of flexural tests were performed in order to investigate the effect of steel fiber reinforcement (SFR) in textile-reinforced concrete (TRC) plates.
Tamás Mészöly +2 more
doaj +1 more source
Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test [PDF]
, 2008 Damage in textile composites is closely connected with the internal micro- and meso-geometry of the reinforcement, and reveals features, which are not present in the damage processes in classical laminates. This paper proposes a test sequence intended to
Baudry, F. +6 more
core +2 more sources
EXPERIMENTAL VERIFICATION OF IMPREGNATED TEXTILE REINFORCEMENT SPLICING BY OVERLAPPING
Acta Polytechnica CTU Proceedings, 2019 This paper presents an experimental verification of impregnated textile reinforcement splicing by overlapping using tensile test of small textile reinforced concrete slabs before its using in the product.
Tomáš Vlach +4 more
doaj +1 more source
Finite element analysis of flexural behavior of textile reinforced concrete slab [PDF]
E3S Web of Conferences, 2021 Order to investigate the failure effect of textile reinforced concrete (TRC) plate under bending load, the corresponding finite element model is established. By comparing the numerical simulation results with the experimental results, the rationality and
Xu Mingqiu +3 more
doaj +1 more source
Reinforced L-Shaped Frame Made of Textile-Reinforced Concrete
Polymers, 2023 Textile-reinforced concrete is becoming more and more popular. The material enables the realization of very thin structures and shells, often with organic shapes. However, a problem with this reinforcement occurs when the structure is bent (contains a corner), and the flexural stiffness around this bent area is required.
Jiří Žalský +4 more
openaire +2 more sources
Embroidered Carbon Reinforcement for Concrete
Buildings, 2023 This research focuses on the manufacturing process and mechanical properties of textile reinforcements fabricated using embroidery technology. The study investigates both 2D and 3D reinforcement products and compares the advantages and possibilities of ...
Julian Konzilia +6 more
doaj +1 more source
MATEC Web of Conferences, 2017 Cantala (Agave cantala), plant of the family Asparagaceae and its fibers, belongs to the leaf fibers group. These fibers are made into coarse twines at about 1.2 mm in diameter.
Purwanto Edy +3 more
doaj +1 more source