Results 71 to 80 of about 118,363 (309)

IRIS thermal balance test within ESTEC LSS

open access: yes, 1988
The Italian Research Interim Stage (IRIS) thermal balance test was successfully performed in the ESTEC Large Space Simulator (LSS) to qualify the thermal design and to validate the thermal mathematical model.
Ballesio, Marino   +2 more
core  

A real-time predictive postural control system with temperature feedback

open access: yesScientific Reports
Balanced posture is essential in sports training, rehabilitation therapy, and robotic control. The application of biofeedback technology has significantly improved postural stability, particularly in individuals with sensory disorders.
Yaoyu Duan   +3 more
doaj   +1 more source

Sprinkled Heat Exchangers in Evaporation Mode

open access: yesEPJ Web of Conferences, 2013
The paper presents research on the heat transfer at sprinkled tube bundles situated in a test chamber at atmospheric pressure and low-pressure. Dynamic effects of physical quantities influencing the heat transfer coefficient during boiling are examined ...
Pospisil J., Snajdarek L., Kracik P.
doaj   +1 more source

On the Lightweight Potential of Laser Additive Manufactured NiTi Triply Periodic Minimal Sheet Lattices

open access: yesAdvanced Engineering Materials, EarlyView.
This study explores the lightweight potential of laser additive‐manufactured NiTi triply periodic minimal surface sheet lattices. It systematically investigates the effects of relative density and unit cell size on surface quality, deformation recovery, compression behavior, and energy absorption.
Haoming Mo   +3 more
wiley   +1 more source

BepiColombo MTM Thermal Balance/Thermal Vacuum Test

open access: yes, 2018
Juergen Schlike, Airbus Defence and Space, GermanyBernd Weinert, Airbus Defence and Space, GermanySean Tuttle, Sigma Space Systems, USAICES203: Thermal TestingThe 48th International Conference on Environmental Systems was held in Albuquerque, New Mexico,
Weinert, Bernd   +2 more
core  

Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment

open access: yesAdvanced Engineering Materials, EarlyView.
The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin   +2 more
wiley   +1 more source

Research on Applicability of Hot-Bulb Anemometer under Low Pressure

open access: yesMATEC Web of Conferences, 2018
In Mars and other deep space exploration missions, the planetary atmosphere makes the difference in heat transfer characteristics on the planetary surface and on-orbit environment.
Xiyuan Li   +4 more
doaj   +1 more source

Characterization of Aluminized Layers on Inconel‐738 Alloy: Microstructure, Modeling of Aluminizing Kinetics, and Thermal Behavior

open access: yesAdvanced Engineering Materials, EarlyView.
This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe   +4 more
wiley   +1 more source

Innovative Processing of Compacted Waste Aluminum Alloy Powders via Controlled Remelting and Solidification

open access: yesAdvanced Engineering Materials, EarlyView.
This study demonstrates an efficient recycling route for out‐of‐spec AlSi10Mg atomized powders through compaction and arc remelting followed by suction casting. By correlating compaction load, cooling rate, and resulting microstructure, we show that intermediate pressures (50–80 kN) and rapid cooling refine dendrites, reduce porosity, and enhance ...
Mila Christy de Oliveira   +4 more
wiley   +1 more source

Enhancing Strength and Electrical Conductivity in Al–Zr–Sc Conductor Alloys Through Sn and Sr Microalloying and Two‐Step Aging Treatment

open access: yesAdvanced Engineering Materials, EarlyView.
Trace additions of Sn and Sr combined with a two‐step aging treatment are shown to enhance the microstructure and performance of Al–Zr–Sc conductor alloys. Strength and electrical conductivity increase concurrently through accelerated precipitation of fine Al3(Sc, Zr) precipitates and improved dislocation resistance, offering a cost‐effective pathway ...
Quan Shao   +3 more
wiley   +1 more source

Home - About - Disclaimer - Privacy