Results 1 to 10 of about 194,352 (287)
Development of a thermal spray coating aerosol generator and inhalation exposure system [PDF]
Toxicology Reports, 2022 Thermal spray coating involves spraying a product (oftentimes metal) that is melted by extremely high temperatures and then applied under pressure onto a surface.
Aliakbar A. Afshari +10 more
doaj +2 more sources
Metals, 2021 The use of the cold gas spray (CGS) process as a metal additive manufacturing (MAM) technique for metallic part production has been deeply studied recently, mainly due to its advantages over other MAM techniques.
Rodolpho F. Vaz +4 more
doaj +1 more source
Bioactive glass coatings obtained by thermal spray: Current status and future challenges
Boletín de la Sociedad Española de Cerámica y Vidrio, 2022 Several inorganic materials such as bioactive glasses, glass–ceramics and calcium phosphates have been shown to be bioactive and resorbable which make them suitable for coating bone implants. This study focuses only on bioactive glasses.
Beatriz Garrido +2 more
doaj +1 more source
Fatigue Bending of V-Notched Cold-Sprayed FeCoCrNiMn Coatings
Metals, 2022 Cold-spray coatings were produced by FeCoCrNiMn high-entropy alloy powders deposited on carbon steel substrate. The coatings were realized at intermediate temperature and high pressure (at 1100 °C and 7 MPa).
Pasquale Cavaliere +5 more
doaj +1 more source
Metals, 2021 The way to decarbonization will be characterized by the huge production of hydrogen through sustainable routes. Thus, the basic production way is water electrolysis sustained by renewable energy sources allowing for obtaining “green hydrogen”.
Pasquale Daniele Cavaliere +2 more
doaj +1 more source
An experimental study of thermal comfort zone extension in the semi-open spray space
Developments in the Built Environment, 2023 Pedestrians will experience different heat stress stages from sunlight to semi-open spray space as they shuttle through stations with spray systems.
Yi Gao +4 more
doaj +1 more source
Alumina Reinforcement of Inconel 625 Coatings by Cold Gas Spraying
Metals, 2020 Reinforced Inconel625 coatings have been successfully deposited by means of cold gas spray (CGS). Alumina has been simultaneously sprayed achieving a homogeneous distribution along the deposit with good cohesion between particles.
Sergi Dosta +3 more
doaj +1 more source
A manifold-based emergency thermal management system for power battery
Case Studies in Thermal Engineering, 2021 The thermal safety of power batteries has received much attention with the rapid development of electric vehicles. This paper proposes a manifold-based emergency thermal management system that sprays refrigerant onto the surface of overheated batteries ...
Hao-dong Wang, Qing Gao
doaj +1 more source
Integration of Open Slag Bath Furnace with Direct Reduction Reactors for New-Generation Steelmaking
Metals, 2022 The present paper illustrates an innovative steel processing route developed by employing hydrogen direct reduced pellets and an open slag bath furnace.
Pasquale Cavaliere +4 more
doaj +1 more source
Optimization of Marine Medium Speed Diesel Engine Performance based on Multi-Injector System [PDF]
E3S Web of Conferences, 2021 Multi-injector system is potential to improve thermal efficiency and NOx emission of diesel engine at the same time. In order to optimize the combustion and emission of Marine medium speed diesel engine, the engine combustion with a multi-injector system
Liu Dai +4 more
doaj +1 more source