Results 11 to 20 of about 88,101 (261)
A review and application of the failure criteria on a graphite epoxy under three-point bending test [PDF]
MATEC Web of Conferences, 2019 The application of failure criteria are difficult partly because they are too various and must be validated by biaxial tests, which are expensive to be achieved.
Benbouras Y. +4 more
doaj +1 more source
Electrical resistivity and ultrasonic measurements during sequential fracture test of cementitious composite [PDF]
Fracture and Structural Integrity, 2014 Cracks in cover of reinforced and pre-stressed concrete structures significantly influence the ingress of deleterious species causing decrease in durability of these structures.
V. Veselý +4 more
doaj +1 more source
Three-Point Bending Test for Three Different Bolt Diameters [PDF]
Journal of Engineering & Technological Advances, 2019 Timber is one of the oldest materials used as main structural element prior concrete and steel which have greater ability to sustain load. The greater demand for timber as construction materials, the wood engineering introduced a new timber type called Engineered Wood Product (EWP).
Nor Jihan Abd Malek, Sadiq Azizi Othman
openaire +1 more source
Firat University Journal of Experimental and Computational Engineering, 2022 In this study, the three-point bending behavior of laminated composite plates reinforced with three-dimensional (3D) spacer fabric was experimentally investigated.
Mustafa Gür +2 more
doaj +1 more source
Journal of Aeronautical Materials, 2022 Based on the three-point bending test, the bending performances of S6C10-800/AC318 composite unidirectional plates with different span-thickness ratios (hereinafter referred to as unidirectional plates) were tested, and the effect of span-thickness ratio
BAI Xin +4 more
doaj +1 more source
Adhesive Contact of Nanowire in Three-Point Bending Test [PDF]
Journal of Adhesion Science and Technology, 2011 A new adhesive receding contact model is presented in this paper for a nanowire in a three-point bending test. Because of its flexability, the nanowire in such a test, may lift-off or separate from its supporting elastic medium; this can dramatically change the nanowire boundary conditions and deformations.
Yin Zhang, Ya-Pu Zhao
openaire +1 more source
Comparative Numerical Analysis of Indirect Tensile Strength Assessment Methods in Rock Engineering [PDF]
Analytical and Numerical Methods in Mining EngineeringThis study presents an in-depth comparative numerical analysis of three distinct methods employed to evaluate the indirect tensile strength of rock materials: the Brazilian Tensile Test (BT), the Three-Point Bending Test (TPBT), and the Four-Point ...
Hadi Fattahi +2 more
doaj +1 more source
A Simple Model for Inverse Estimation from Three-point Bending Tests
Procedia Structural Integrity, 2023 Laboratory experiments provide us with a large amount of data, especially if the test is continued after peak loading, so that we can determine additional material properties beyond those required by the standards. It is necessary to link the measured data to a mathematical model, which must establish the appropriate connections between the data and ...
Kožar, Ivica +2 more
openaire +3 more sources
Comparative study on the results of different tensile test methods of artificial frozen soil [PDF]
E3S Web of Conferences, 2020 Tensile strength of frozen soil is an important index for frozen soil engineering design. It is found that uniaxial tensile strength, three-point bending and four-point bending tensile strength values of frozen soil are inconsistent in the test. For this
Yu Chang-yi, Lu Ming-yue
doaj +1 more source
Three point bending test of glass/epoxy composite health monitoring by acoustic emission
Alexandria Engineering Journal, 2019 As glass epoxy composites have special properties, they are used in different structures. Health monitoring of this kind of composite is very important due to its use in many industries.
Nima Beheshtizadeh +2 more
doaj +1 more source