Results 21 to 30 of about 5,139 (184)
Metals, 2017 Compared to other alloys, Ti6Al4V is the most used in medicine. In recent years, concerns regarding the toxicity of Al and V elements found in the composition of Ti6Al4V have drawn the attention of the scientific community, due to the release of Al or V ...
Cosmin M. Cotrut +10 more
doaj +1 more source
Metals, 2023 The addition of tungsten can improve the high-temperature oxidation resistance of titanium alloys. However, as its applications continue to expand, new demands are being placed on its room temperature strength.
Junguo Li +3 more
doaj +1 more source
Investigation of phase transformation in Fe microalloyed Ti6Al4V alloy during continuous heating process [PDF]
MATEC Web of Conferences, 2020 The phase transformation and dilatometric curves in Fe microalloyed Ti6Al4V alloy (Ti6Al4V-Fe) during continuous heating at 1 ℃ /min heating rate had been studied by dilatometer and metallographic methods, and β phase transition temperatures of alloy ...
Wang Changliang +4 more
doaj +1 more source
Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses [PDF]
Tribology - Materials, Surfaces & Interfaces, 2015 Implantation of a total hip replacements (THR) is an effective intervention in the management of arthritis. Modularity at the taper junction of THR was introduced in order to improve the ease with which the surgeon could modify the length of the taper section and the overall length of the replacement.
Oladokun, AO +6 more
openaire +3 more sources
Investigation of the Surface Properties of TiN-Coated Ti6Al4V Alloy [PDF]
Applied Engineering Letters : Journal of Engineering and Applied Sciences, 2021 Titanium alloys are widely used in the aerospace industry due to their good mechanical properties. Especially Ti6Al4V alloy is preferred in machine parts that require specific strength in aerospace. However, the tribological properties of the Ti6Al4V alloy are poor and need improvement.
DANIŞMAN, ŞENGÜL +2 more
openaire +3 more sources
Journal of Materials Research and Technology, 2020 The technology of 3D printing from metal powder is gaining popularity due to the possibility of producing structural elements of any geometry, which making by the use of the methods applicated so far is difficult or impossible.
Karolina Karolewska +3 more
doaj +1 more source
Materials & Design, 2021 The low temperature solid deposition characteristics of cold spraying technology are conducive to the remanufacturing/repair of oxidation sensitive titanium alloy in the atmosphere.
Lijing Yang +6 more
doaj +1 more source
Pack Siliconizing of Ti6Al4V Alloy
Acta Physica Polonica A, 2017 In this study, it was aimed to produce titanium silicide layer on Ti6Al4V by a simple, cheap and efficient method of pack siliconizing. Siliconizing was performed in a pack containing a mixture composed of SiO2 powder as siliconizing source, pure Al powder as a reducer for siliconizing, NH4Cl as an activator and Al2O3 powder as filler, at 1000 degrees ...
Çelebi Efe, Gözde Fatma +3 more
openaire +2 more sources
International Journal of Electrochemical Science, 2021 In this study our goal was to monitoring the corrosion behavior of titanium alloy (TI6Al4V) in four solution: saline solution, saline solution with addition of 1% H2O2, saline solution with 1% albumin and saline solution with mixed 1% albumin + 1% H2O2 ...
Benea Lidia, Simionescu Nicoleta
doaj +1 more source
Influences of Hydrogenation on Microstructure and Microhardness of Ti6Al4V Alloy
Materials Science Forum, 2007 The microstructures of Ti6Al4V alloy after hydrogenation have been investigated and analysed by optical microscopy (OM), X-ray diffraction (XRD) and transmission electron microscopy (TEM), and the influence of hydrogenation on the hardness of α and β phases has been analysed by microhardness testing.
J.W. Zhao +5 more
openaire +1 more source