Results 101 to 110 of about 427,545 (154)
This study successfully deposited CrN, CrAlN, and TiAlN coatings on the surface of Cr12MoV substrate using multi-arc ion plating (MAIP). The influence of phase composition and surface morphology on the hardness, adhesion strength, friction performance ...
Rongchuan Lin +5 more
doaj +1 more source
The study of ablation and the laser-induced periodic surface structure (LIPSS) creation during the static and dynamic ultrafast laser (UFL) processing of the Al2O3/TiAlN protective coating is reported.
Gaković, Biljana +5 more
core +1 more source
Influence of surface roughness on selected properties of the TiAlN coating
The HS6-5-2C steel samples with different surface roughness were used for the tests. After grinding had a roughness parameter of Ra = 0,03 μm, and after polishing Ra = 0,01 μm. A TiAlN coating was applied to the substrate prepared in this way.
J. Kowalczyk +3 more
doaj
Characterization of defects in PVD TiAlN hard coatings
PVD trde prevleke pridobivajo pomen na različnih področjih uporabe. Pri različnih aplikacijah so pogosto izpostavljene korozijskemu okolju. Trde prevleke so kemijsko inertne in same po sebi korozijsko obstojne. Med njihovo pripravo pa nastane v njih veliko defektov (kraterji, "pinholi"). Nekateri od njih segajo do podlage.
Gselman, Peter +5 more
openaire +1 more source
Pulsed laser deposition of TiN and TiAlN coating
Kathuria, Y.P. +2 more
openaire +1 more source
Tribological characterization of AlTiN, TiN, and TiAlN coatings
Joanna Kowalczyk, Monika Madej
openaire +1 more source
Comparative Study on Crack Resistance of TiAlN Monolithic and Ti/TiAlN Multilayer Coatings
Abstract TiAlN monolithic and Ti/TiAlN multilayer coatings were fabricated on Ti–6Al–4V substrates by a self-designed multisource cathodic arc ion deposition system. The mechanical properties and crack evolution of the coatings were focused under scratch tests with different constant loads.
Xiao Zuo, Jintao Shuai, Aiying Wang
exaly +3 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Ceramics International, 2022
Abstract Three different coatings, namely TiAlN, TiAlN (external)/NbN (internal) and NbN (external)/TiAlN (internal), were deposited on cemented carbides by arc ion plating. The comparative investigation conducted in this study elucidates the effect of the NbN layer and coating systems on the growth, mechanical properties, and tribological ...
Ji Xiong, Qianbing You, Zhixing Guo
exaly +2 more sources
Abstract Three different coatings, namely TiAlN, TiAlN (external)/NbN (internal) and NbN (external)/TiAlN (internal), were deposited on cemented carbides by arc ion plating. The comparative investigation conducted in this study elucidates the effect of the NbN layer and coating systems on the growth, mechanical properties, and tribological ...
Ji Xiong, Qianbing You, Zhixing Guo
exaly +2 more sources
Oxidation Behavior and Mechanisms of TiAlN/VN Coatings [PDF]
Hard wear-resistant coatings require excellent oxidation resistance for high-speed machining operations. Moreover, the oxide formed is integral to the frictional behavior and therefore the success of the coating. The oxidation behavior of TiAlN/VN nanoscale multilayer coatings was investigated using high-resolution techniques and was compared with TiN ...
Z. Zhou +5 more
openaire +2 more sources

