Results 31 to 40 of about 1,375 (181)

Optimizing Post Friction Stir Welding Heat Treatment in Dissimilar Friction Stir Welded 6061/AlSi10MgMn Joints for Electrical Vehicle Battery Housing

Advanced Engineering Materials, Volume 28, Issue 5, 4 March 2026.
Microstructural evolution and hardness optimization along the cross‐section of friction stir welded AA6061/AlSi10MgMn joints, for electric vehicle battery housings, were investigated. Postweld aging between 170°C and 220°C enhances hardness uniformity within the nugget zone.
Emanuele Ghio, Emanuela Cerri
wiley   +1 more source

Characteristics of Welding and Arc Pressure in the Plasma–TIG Coupled Arc Welding Process

Metals, 2018
In this article, a novel hybrid welding process called plasma-TIG (Tungsten Inert Gas welding) coupled arc welding was proposed to improve the efficiency and quality of welding by utilizing the full advantage of plasma and TIG welding processes.
Bo Wang, Xun-Ming Zhu, Hong-Chang Zhang, Hong-Tao Zhang, Ji-Cai Feng   +4 more
doaj   +1 more source

Multifaceted Behavior and Functional Versatility of Ferritic Stainless Steels, Part I: Applications and Processing, a Review

steel research international, Volume 97, Issue 3, Page 1201-1225, March 2026.
This review investigates the processing‐microstructure‐property relationships in ferritic stainless steels (FSSs). It highlights advances in deformation behavior, heat treatments, surface modifications, and alloying effects. Theoretical models, including Johnson‐Mehl‐Avrami‐Kolmogorov, Arrhenius, nucleation theory, and diffusion theories, are discussed
Shahab Bazri, Carlo Mapelli, Silvia Barella, Andrea Gruttadauria, Davide Mombelli   +4 more
wiley   +1 more source

Fatigue Lifetime Assessment of HFMI‐Treated Welded Joints According to the Peak Stress Method

Fatigue &Fracture of Engineering Materials &Structures, Volume 49, Issue 3, Page 790-819, March 2026.
ABSTRACT High‐frequency mechanical impact (HFMI) is an effective post‐weld treatment that enhances fatigue strength by inducing compressive residual stresses, localized strain hardening, and increasing weld toe radii. The peak stress method (PSM) was recently extended to evaluate the fatigue strength of HFMI‐treated steel joints under uniaxial loading ...
Alberto Campagnolo, Martin Leitner, Giovanni Meneghetti   +2 more
wiley   +1 more source

A comprehensive review on the effect of TIG welding parameters on intermetallic formation and mechanical properties of dissimilar aluminum alloy welds

Results in Engineering
The production of intermetallic compounds (IMCs) and the mechanical characteristics of different aluminum alloy joints are examined in this review in relation to Tungsten Inert Gas (TIG) welding conditions.
Abhishek Saxena, Kuldeep K․ Saxena, Rakesh C, A․Anitha Lakshmi, Ankit Sharma, Ashish Kumar   +5 more
doaj   +1 more source

An Experimental Investigation on Fatigue Properties of AA3003-H14 Aluminum alloy Friction Stir Welds

Journal of Engineering, 2011
AA3003-H14 aluminum alloy plates were welded by friction stir welding and TIG welding. Fatigue properties of the welded joints were evaluated based on the superior tensile properties for FSW at 1500 rpm rotational speed and 80 mm/min welding speed ...
Ayad M. Takhakh, Asmaa M. Abdullah
doaj   +1 more source

Microstructural Evolution and Mechanical Performance of Plasma‐Assisted Hybrid Friction Stir Welded Dissimilar Aluminum–Copper Joints

Advanced Engineering Materials, Volume 28, Issue 3, 4 February 2026.
Plasma‐assisted hybrid friction stir welding of dissimilar AlCu joints employs localized plasma preheating to balance heat input and enhance plastic flow. The optimized process reduces axial force by up to 35%, refines the microstructure, and achieves ≈96% joint efficiency.
Deepak Kumar Yaduwanshi, Pankaj Shrivastava, Ganesh Chouhan, Velaphi Msomi   +3 more
wiley   +1 more source

Active flux tungsten inert gas welding of austenitic stainless steel AISI 304

Metalurgija, 2016
The paper presents the effects of flux assisted tungsten inert gas (A-TIG) welding of 4 (10) mm thick austenitic stainless steel EN X5CrNi1810 (AISI 304) in the butt joint.
D. Klobčar, J. Tušek, M. Bizjak, S. Simončič, V. Lešer   +4 more
doaj  

Coupled Experimental Study and Thermodynamic Modeling of GeO2 and GeO2–CaO and GeO2–SiO2 Binary Systems

Journal of the American Ceramic Society, Volume 109, Issue 2, February 2026.
ABSTRACT The phase diagram of the GeO2–CaO system was investigated using differential thermal–thermogravimetric analysis and the equilibration–quenching technique, followed by electron probe microanalysis and X‐ray diffraction. The Ca2Ge7O16 compound was confirmed to be stable, and a eutectic reaction of L → GeO2(hex) + Ca2Ge7O16 was identified in the ...
Saleh Rasouli‐Jouryabi, Elmira Moosavi‐Khoonsari   +1 more
wiley   +1 more source

Microstructural and Mechanical Characteristics of Welded CoCrNi‐Based Medium Entropy Alloys

Journal of Engineering, Volume 2026, Issue 1, 2026.
Medium entropy alloys (MEAs), consisting of two to four principal elements in near‐equiatomic ratios, are emerging materials with excellent strength, ductility, toughness, and corrosion resistance, particularly under cryogenic and high‐temperature conditions.
Fainah Madewu, Nicholus Malatji, Mxolisi Brendon Shongwe, Lehlogonolo Rudolf Kanyane, Himadri Majumder   +4 more
wiley   +1 more source