Results 141 to 150 of about 2,909 (260)

Effect of different flue gas recirculation rates on low‐NOx combustion characteristics: A numerical simulation based on the combustion process of a gas boiler

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract NOx emissions from gas boilers severely impact the environment, and flue gas recirculation (FGR) technology can effectively reduce such emissions, yet the effects of different FGR rates on combustion performance and NOx formation remain unclear. This study thus used numerical simulation (via ANSYS Fluent, adopting the realizable k‐ε turbulence
Chao Min, Shuhao Xu, Yitao Yang, Peng Wang   +3 more
wiley   +1 more source

In‐situ asphaltene capture with iron oxide nanoparticles in steam‐assisted gravity drainage (SAGD) for improved recovery and partial upgrading of bitumen

The Canadian Journal of Chemical Engineering, EarlyView.
Key improvements obtained by incorporating nanoparticles into a lab‐scale SAGD process configuration. The bar plots show enhanced oil recovery, reduced viscosity, and increased asphaltene adsorption in nanoparticle‐assisted scenarios compared with conventional SAGD.
Luis Prada, Saleh S. Baakeem, Mabkhot BinDahbag, M. Daniela Contreras‐Mateus, Jesus Botett, Afif Hethnawi, Nashaat N. Nassar   +6 more
wiley   +1 more source

Experimental investigation of diffusion flames with different baffle-plate air-hole diameters. [PDF]

Sci Rep
Mohammed ES, Gad HM, Ibrahim IA, Habik SE, Elsakka MM.   +4 more
europepmc   +1 more source

Economic and environmental implications of the development of UASB reactors in Mexico for sustainable industrial wastewater treatment

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract The objective of this work is to demonstrate that the inclusion of an up‐flow anaerobic sludge bed (UASB reactor) within an industrial wastewater treatment plant reduces the plant's investment and operating costs compared to a system based solely on conventional complete‐mix activated sludge (CMAS), operating under the same design principles ...
Juan Manuel Morgan‐Sagastume, Adalberto Noyola   +1 more
wiley   +1 more source

Optimization strut-based fuel injection using multi-step hydrogen jets and air-assisted mixing in supersonic flow. [PDF]

Sci Rep
Houria ZB, Hajlaoui K, Aminian SA, Musa VA, Sadeq AM, Shaban M, Aich W, Kriaa K.   +7 more
europepmc   +1 more source

Box–Behnken optimization and ANN‐ANFIS integrated modelling for transesterification using thermally activated basic oxygen furnace slag catalyst

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Global energy demand and environmental concerns have intensified the search for renewable and sustainable energy sources. This study thus, focuses on optimizing the transesterification process of waste cooking oil (WCO) using thermally activated basic oxygen furnace slag catalyst calcined at 850°C (BOF 850). The optimization and modelling were
Johra S. Ali, Hillary L. Rutto
wiley   +1 more source

Clathrate hydrate crystallization

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Clathrate hydrate crystallization has been an area of interest to chemical engineers from the point of view of crystal structure, thermophysical properties, phase equilibria, kinetics, industrial applications, and environmental (climate change) implications.
Peter Englezos
wiley   +1 more source

Effect of Prechamber Design Parameters on Combustion Characteristics, Emission, and Performance of a Methanol Engine. [PDF]

ACS Omega
Luo J, Liu W, Gong S, Fang Z, Weng W, Gao X.   +5 more
europepmc   +1 more source

Experimental methods in chemical engineering: Magnetometry

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Magnetometry is a non‐invasive technique to characterize the behaviour of magnetic materials of which the most common contain Fe, Co, and Ni. Vibrating sample magnetometers (VSMs) vibrate samples at a fixed frequency in a static, homogeneous magnetic field to induce a voltage in pick up coils according to Faraday's law of induction.
Michael Claeys, Dominic De Oliveira, Gregory S. Patience, M. Olga Guerrero‐Pérez   +3 more
wiley   +1 more source

Influence of Piston Bowl Geometry and Hydrogen-Diesel Mixing Ratios on Dual-Fuel Engine Combustion. [PDF]

ACS Omega
Kumar R, Nath S, Atul, Ranjan V, Khan S, Ghoshal SK.   +5 more
europepmc   +1 more source