Results 111 to 120 of about 859,127 (297)
MATEC Web of Conferences, 2015 A 1.5mm thickness as-cast Fe-2.7%Si strip was produced by twin-roll strip casting and the precipitates under different isothermal holding time (0.5 min–30 min) and cooling rates (1∘/s–20 ∘C/s) were investigated by thermal simulation experiment technology
Mou Junsheng +8 more
doaj +1 more source
Materials Science ForumThe temperature of an aluminum alloy (Al-6%Si) strip cast using a vertical-type high-speed twin-roll caster was measured by inserting a K-type thermocouple into the strip. The effects of the roll diameter on supercooling, cooling rate, and temperature at
T. Haga +3 more
semanticscholar +1 more source
Clad Strip Casting by a Roll Caster
, 2011 Casting of clad strip, which was one of the composite alloys, was tried using a roll caster. A vertical tandem type twin roll casters for clad strip were designed and assembled to cast the clad strip. Three layers of clad strip could be cast.
Toshio Haga +3 more
core +1 more source
SmartBot, EarlyView.Electrostatic clutches offer programmable variable stiffness for multi‐DOF robots, but their continuous motion is usually bottlenecked by spatial constraints and detachment delays. Here, the authors report a compact annular electrostatic clutch joint with a biphasic amplitude‐frequency modulation strategy to rapidly mitigate residual polarization ...
Haochen Yong +5 more
wiley +1 more source
Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting
, 2014 Twin-roll strip casting is a concerned technology for economically producing magnesium alloys sheets. In this paper, numerical simulation of the twin-roll strip casting of an AZ61 magnesium alloy was carried out and the optimal process parameters were ...
Lizi He (20192562) +7 more
core +1 more source
Twin Roll Casting of Aluminium Alloy ADC12, A3003, A7075
, 2017 This paper describes a vertical type twin roll strip casting process for producing aluminum alloy strip of ADC12, A3003 and A7075. Twin roll casting process is able to produce a strip from molten metal directly.
Junshi Ichikawa +8 more
core +1 more source
Small, EarlyView.Force‐driven microneedles are presented as active therapeutic microdevices that overcome the diffusion limits of conventional patches. By integrating gas generation, magnetic actuation, cavitation, or iontophoresis, these systems drive payloads deeper into tissue, enabling faster, more controlled delivery and highlighting key design principles and ...
Majed Amini +3 more
wiley +1 more source
A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting
Teshugang, 2007 Large inclusions and ultra-fine inclusions in 304 stainless steel thin strip produced by twin roll strip casting have studied by scanning and transmission electron microscope. Results indicated that inclusions in thin strip were spheroidal compound oxide
黄福祥 +5 more
doaj
Silver‐Modulated Copper Dynamics Under Pulsed Tandem Electrochemical CO2 Reduction
Small, EarlyView.Under pulsed CO2 reduction, Ag does more than provide CO for tandem catalysis. It redirects how Cu dissolves, redeposits, and remains catalytically relevant, generating an Ag‐rich yet Cu‐active working state. Correlative surface and solution analysis reveal that tandem performance emerges from dynamic material redistribution rather than from a static ...
Blaž Tomc +16 more
wiley +1 more source
Mechanical Engineering JournalHigh-speed twin-roll casting is expected to achieve highly productive upgrade recycling of aluminum alloys. In this study, Al-3%Si-1%Fe prepared from 6022 and ADC12 aluminum alloys was used as the model alloy for upgrade recycling. This alloy is based on
Seina KUROTATSU +2 more
doaj +1 more source