Results 1 to 10 of about 4,678 (303)
Metals, 2021 Based on conventional hot rolling processes and strip casting processes, Cu precipitation strengthening is used to improve the strength of non-oriented silicon steel in order to meet the requirements of high-speed driving motors of electric vehicles ...
Feng Fang +9 more
doaj +2 more sources
Journal of Hebei University of Science and Technology, 2023 In order to solve the problems of strip break and strip bulging in the commissioning process of thin strip continuous casting industrial production line and improve the solidification structure and surface quality of thin strip continuous casting, an ...
Suling LU +6 more
doaj +1 more source
Evolution of solidification structure for Si–Mn bearing AHSS under typical cooling rates
Journal of Materials Research and Technology, 2021 In this paper, two near-net-shape continuous casting technologies (strip casting and compact strip production) were used to produce a typical Si–Mn bearing Advanced High Strength Steel (AHSS) slab/strip, aiming to provide a clear understanding on the ...
Hui Xu +4 more
doaj +1 more source
Continuous Casting Practices for Steel: Past, Present and Future
Metals, 2022 This historical review of casting methods used to produce sheets of steel for automobiles, household products, rocket bodies, etc., all point toward the development of one-step commercial processes, which are capable of casting liquid steel directly into
Roderick I. L. Guthrie, Mihaiela M. Isac
doaj +1 more source
Mg-Based Materials with Quasiamorphous Phase Produced by Vertical Twin-Roll Casting Process
Metals, 2020 Metallic materials with micron grains, submicron grains, or amorphous structures have attracted great interest in recent decades owing to their excellent mechanical properties and corrosion resistance.
Hai Liu +3 more
doaj +1 more source
Metals, 2022 Tool steel for hot working is usually used for the rolls of conventional twin-roll casters for aluminum alloys. In a vertical high-speed twin-roll caster, copper rolls are used to rapidly solidify the aluminum alloys and to increase the casting speed ...
Toshio Haga, Yukihiro Kurahashi
doaj +1 more source
Metals, 2022 In this investigation, strips of an experimental Al-Mn-Cu-Be alloy were manufactured by high-speed single-roll and twin-roll casting to stimulate the formation of a quasicrystalline phase during solidification.
Franc Zupanič +3 more
doaj +1 more source
Casting Process at Roll Bite in Strip Cast Using Vertical-Type High-Speed Twin-Roll Caster
Metals, 2022 The solidification process in strip casting using a vertical-type high-speed twin-roll caster was clarified by inserting a 0.1 mm diameter K-type thermocouple into a strip during casting.
Toshio Haga, Yukihiro Kurahashi
doaj +1 more source
Analysis of the influence parameters on steel strip defects in continuous roll casting-rolling
Mechanics and Advanced Technologies, 2023 Problem. The casting-rolling process is currently one of the most effective and promising processes used for the production of steel sheets. The advantages of this process include the small dimensions of the unit and a significant reduction in energy ...
Alexey Nogovitsyn +4 more
doaj +1 more source
The Effect of Direct Strip Casting on the Kinetics of Phase Transformation of a Dual Phase Steel
Metals, 2022 A dual phase steel has been produced directly from the liquid under conditions that simulate direct strip casting and thin slab casting. The kinetics of polygonal ferrite formation during the inter-critical anneal were quantified using the JMAK approach,
Nam Mai +2 more
doaj +1 more source